Draytek Vigor2820 Series User Manual page 71

Adsl2/2+ security firewall
Hide thumbs Also See for Vigor2820 Series:
Table of Contents

Advertisement

Enable/Disable
DSL Modem Settings
ISP Access Setup
IP Address from ISP
Obtain an IP address
automatically
Specify an IP address
DNS Server IP
Address
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
Set up the DSL parameters required by your ISP. These are vital for
building DSL connection to your ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
QoS Type -Select a proper QoS type for the channel.
Protocol - Select a proper protocol for this channel. There are three
options, PPPoE, PPPoA and MPoA for you to select. The following
settings will be changed according to the protocol selected here.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check Always
On.
Username – Type in the username provided by ISP in this field.
Password – Type in the password provided by ISP in this field.
PPP Authentication – Select PAP only or PAP or CHAP for
PPP.
Idle Timeout – Set the timeout for breaking down the Internet after
passing through the time without any action. This setting is active
only when the Always On option is note selected.
Fixed IP - Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Fixed IP Address -Type a fixed IP address.
Click this button to obtain the IP address automatically.
Router Name – Type in the router name provided by ISP.
Domain Name – Type in the domain name that you have assigned.
Click this radio button to specify some data.
IP Address – Type in the private IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
Type in the primary IP address for the router. If necessary, type in
secondary IP address for necessity in the future.
61
Vigor2820 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor2820nVigor2820vVigor2820vnVigor2820vsVigor2820vsn

Table of Contents