Data Flow Monitor - Draytek Vigor2820 Series User Manual

Ping to
IP Address
Run
Clear
3 . 1 6 . 7 D a t a F l o w
3 . 1 6 . 7 D a t a F l o w
This page displays the running procedure for the IP address monitored and refreshes the data
in an interval of several seconds. The IP address listed here is configured in Bandwidth
Management. You have to enable IP bandwidth limit and IP session limit before invoke Data
Flow Monitor. If not, a notification dialog box will appear to remind you enabling it.
Click Diagnostics and click Data Flow Monitor to open the web page. You can click IP
Address, TX rate, RX rate or Session link for arranging the data display.
Enable Data Flow
Monitor
Refresh Seconds
Use the drop down list to choose the destination that you want to
ping.
Type in the IP address of the Host/IP that you want to ping.
Click this button to start the ping work. The result will be
displayed on the screen.
Click this link to remove the result on the window.
M o n i t o r
M o n i t o r
Check this box to enable this function.
Use the drop down list to choose the time interval of refreshing
data flow that will be done by the system automatically.
253
Vigor2820 Series User's Guide