Draytek Vigor2820 Series User Manual page 63

After finishing all the settings here, please click OK to activate them.
S S t t a a t t i i c c o o r r D D y y n n a a m m i i c c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use static or dynamic IP as the accessing protocol of the Internet, select Static or Dynamic
IP mode. The following web page will appear.
Enable/ Disable
ISDN Dial Backup
Setup
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Fixed IP Address -Type a fixed IP address.
Default MAC Address– You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address – Type the MAC address for the router
manually.
I I P P f f o o r r W W A A N N 2 2
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click ISDN > Dialing to a
53
Vigor2820 Series User's Guide