For Vigor2820V - Draytek Vigor2820 Series User Manual

1 . 2 . 3 F o r V i g o r 2 8
1 . 2 . 3 F o r V i g o r 2 8
LED
ACT (Activity)
USB
CSM
WCF
DSL
WAN2
Line
Phone 1/2
LED on Connector
LAN 1(Giga)
LAN 2/3/4
WAN 2
2 0 V
2 0 V
Status
Blinking
Off
On
Blinking
On
On
On
Blinking
On
Blinking
On
Off
On
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Explanation
The router is powered on and running normally.
The router is powered off.
A USB device is connected and active.
The data is transmitting.
The profile of CSM (Content Security Management) for
IM/P2P application is enabled from Firewall >>
General Setup. (Such profile is established under CSM
menu).
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup and the web content filter
profile is established under CSM menu.)
The router is ready to access Internet through DSL link.
Slowly: The modem is ready.
Quickly: The connection is training.
The router is ready to access Internet through WAN
connection.
It will blink while transmitting data.
A PSTN phone call comes (in and out). However, when
the phone call is disconnected, the LED will be off about
six seconds later.
There is no PSTN phone call.
The phone connected to this port is off-hook.
The phone connected to this port is on-hook.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is connected with 10Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is connected with 10Mbps.
7
Vigor2820 Series User's Guide