Draytek Vigor2820 Series User Manual page 205

DND (Do Not Disturb)
mode
CLIR (hide caller ID)
Default SIP Account
FXO Feature
In addition, you can press the Advanced button to configure tone settings, volume gain, MISC
and DTMF mode. Advanced setting is provided for fitting the telecommunication custom for
the local area of the router installed. Wrong tone settings might cause inconvenience for users.
To set the sound pattern of the phone set, simply choose a proper region to let the system find
incoming calls will be forwarded into SIP URL only when the
local system is busy. No Answer means if the incoming calls do
not receive any response, they will be forwarded to the SIP URL
by the time out. Busy or No Answer means if the incoming
calls do not receive any response or when the local system is
busy, they will be forwarded to the specified SIP URL by the
time out.
SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or
abc@iptel.org) as the site for call forwarded.
Time Out – Set the time out for the call forwarding. The default
setting is 30 sec.
Set a period of peace time without disturbing by VoIP phone
call. During the period, the one who dial in will listen busy tone,
yet the local user will not listen any ring tone.
Index (1-15) in Schedule - Enter the index of schedule profiles
to control the DND mode according to the preconfigured
schedules. Refer to section 3.8.2 Schedule for detailed
configuration.
Index (1-60) in Phone Book - Enter the index of phone book
profiles. Refer to section 3.11.1 DialPlan – Phone Book for
detailed configuration.
Check this box to hide the caller ID on the display panel of the
phone set.
You can set SIP accounts (up to six groups) on SIP Account
page. Use the drop down list to choose one of the profile names
for the accounts as the default one for this phone setting.
Play dial tone only when account registered - Check this box
to invoke the function.
Enable ISDN to VoIP (On-Net) Calls – Check this box to
make all the outgoing calls from ISDN line to be forwarded to
receivers by Internet.
Enable VoIP to ISDN (Off-Net) Calls –Check this box to
make all the incoming calls coming from Internet to be
forwarded to receivers by ISDN line.
Loop Through to Phone Port – Choose this radio button to
make all the calls controlled by traditional PSTN phone. It will
tack effect only if MSN mapping ring port is not configured.
Loop Through to ISDN1-S0 Port – Choose this radio button to
make all the calls controlled by ISDN line.
195
Vigor2820 Series User's Guide