Managing Access Point Groups In The Wlan - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
2. Click the + button to add another group.
3. To specify profile definition settings, select a group tab and click the Edit button. The Edit
Profile screen displays:
Figure 36. Profile Definition for Access Point Groups
4. Configure the profile for the access point group. These settings are explained in
Basic Security Profile
5. Click Apply to save your settings.

Managing Access Point Groups in the WLAN

By default all access points are in the basic group. You can use this screen to assign access
points to access point groups.
Definition.
Chapter 6: Managing Access Point Groups
Some
selections here
cause the
Authentication
Server field
to display.
Table 22,
| 66