ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Note:
Restore only settings that were backed up from the same software
version.
Upgrading the Configuration File
The wireless controller provides two methods for upgrading its firmware:
•
Scheduled, automatic update
•
Manual update
There are two boot partitions to allow you to switch the wireless controller from one firmware
version to another.
To upgrade the firmware:
1.
Go to the NETGEAR support page for the WC7520 wireless controller at
http://kb.netgear.com/app/products/model/a_id/13060
2.
If you intend use a local file for the upgrade, download the firmware from the NETGEAR
support page for the WC7520 wireless controller and save it to your computer.
3.
Select Maintenance > Upgrade. The Firmware Upgrade screen displays.
Figure 61.
or to a TFTP or FTP server.
Chapter 9: Maintaining the Controller
| 103