Cisco SPA942 - - IP Phone Administration Manual page 259

SPA and Wireless IP Phone Field Reference
Ext Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
SIP Debug Option
Refer Target Bye Delay
Sticky 183
Description
SIP messages are received at or sent from the proxy
listen port. This feature controls which SIP messages
to log. Choices are as follows:
•
none—No logging.
•
1-line—Logs the start-line only for all messages.
•
1-line excl. OPT—Logs the start-line only for all
messages except OPTIONS requests/responses.
•
1-line excl. NTFY—Logs the start-line only for all
messages except NOTIFY requests/responses.
•
1-line excl. REG—Logs the start-line only for all
messages except REGISTER requests/responses.
•
1-line excl. OPT|NTFY|REG—Logs the start-line only
for all messages except OPTIONS, NOTIFY, and
REGISTER
requests/responses.
•
full—Logs all SIP messages in full text.
•
full excl. OPT—Logs all SIP messages in full text
except OPTIONS requests/responses.
•
full excl. NTFY—Logs all SIP messages in full text
except NOTIFY requests/responses.
•
full excl. REG—Logs all SIP messages in full text
except REGISTER requests/responses.
•
full excl. OPT|NTFY|REG—Logs all SIP messages in
full text except for OPTIONS, NOTIFY, and
REGISTER requests/responses.
Defaults to none.
For the Refer Target Bye Delay, enter the appropriate
period of time in seconds.
Defaults to 0.
If this feature is enabled, the IP telephony ignores
further 180 SIP responses after receiving the first 183
SIP response for an outbound INVITE. To enable this
feature, select yes. Otherwise, select no.
Defaults to no.
B
257