Cisco SPA942 - - IP Phone Administration Manual page 40

3
STEP 6
STEP 1
STEP 2
38
c. Enter the following string in the Extended Function field:
fnc=blf+cp;sub=Stephanie@$PROXY;ext=300@$PROXY
Using the following syntax:
fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY
where:
- fnc: function
- blf: busy lamp field
- cp: call pickup
- sub: station name
- ext: extension
Click Submit All Changes. After the phone reboots, the SPA962 (in this example)
should show the following color LEDs for the monitored lines:
• Green: Available
• Red: Busy
• Red Fast Blink: Ringing
If the phone LEDs display orange or slow blinking orange, there is a problem:
Orange denotes that the phone failed to subscribe (received 4xx response) and
slow blinking orange denotes an undefined problem (there may be no response to
subscribe, or BLF).
In this example, after this configuration, Bob will be able to monitor Stephanie's
line. He can press line button 4 to pick up a call ringing at Stephanie's line.
Configuring Speed Dial
In this example, the assistant Bob (extension 200) has another idle line (line 5) on
his SPA962. He would like to be able to speed dial his supervisor Mark (extension
400) from that line.
To configure this feature for Bob's SPA962:
Log in to the web administration interface.
Click Admin Login.
Configuring Lines and Extensions
Cisco SPA and Wireless IP Phone Administration Guide
Configuring Lines