Rtp Parameters - Cisco SPA942 - - IP Phone Administration Manual

SPA and Wireless IP Phone Field Reference
SIP Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Retry Reg RSC

RTP Parameters

Parameter
RTP Port Min
RTP Port Max
RTP Packet Size
Max RTP ICMP Err
Description
Interval to wait before the SPA9000 retries registration
after failing during the last registration.
Defaults to blank.
Description
Minimum port number for RTP transmission and
reception. Minimum port number for RTP transmission
and reception. Should define a range that contains at
least 10 even number ports (twice the number of lines);
for example, 100 – 106.
Defaults to 16384.
Maximum port number for RTP transmission and
reception. Should define a range that contains at least
10 even number ports (twice the number of lines); for
example, 100 – 106.
Defaults to 16482.
Packet size in seconds, which can range from 0.01 to
0. 1 6. Valid values must be a multiple of 0.01 seconds.
Defaults to 0.030.
Number of successive ICMP errors allowed when
transmitting RTP packets to the peer before the
SPA9000 terminates the call. If value is set to 0, the
SPA9000 ignores the limit on ICMP errors.
Defaults to 0.
B
209