Advanced Scripting For Cadences, Call Progress Tones, And Ring Tones; Example 1: Normal Ring; Example 2: Distinctive Ring (Short,Short,Short,Long) - Cisco SPA942 - - IP Phone Administration Manual

Spa and wireless ip phone
Hide thumbs Also See for SPA942 - Cisco - IP Phone:
Table of Contents

Advertisement

8
Advanced Scripting for Cadences, Call Progress Tones, and
Ring Tones
148
Configuring Regional Parameters and Supplementary Services

Advanced Scripting for Cadences, Call Progress Tones, and Ring Tones

Advanced information on defining tones an and cadences follows.
A CadScript is a mini-script that specifies the cadence parameters of a signal. It
can be up to 127 characters. The syntax follows:
1[;S2]—where Si=Di(oni,1/offi,1[,oni,2/offi,2[,oni,3/offi,3[,oni,4/offi,4[,oni,5/
offi,5[,oni,6/offi,6]]]]]) and is known as a section, oni,j and offi,j are the on/off
duration in seconds of a segment and i = 1 or 2, and j = 1 to 6.
Di is the total duration of the section in seconds. All durations can have up to 3
decimal places to provide 1 ms resolution. The wildcard character "*" stands
for infinite duration. The segments within a section are played in order and
repeated until the total duration is played.

Example 1: Normal Ring

60(2/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60 s
Number of Segments = 1
Segment 1: On=2s, Off=4s
Total Ring Length = 60s

Example 2: Distinctive Ring (short,short,short,long)

60(.2/.2,.2/.2,.2/.2,1/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60s
Number of Segments = 4
Segment 1: On=0.2s, Off=0.2s
Segment 2: On=0.2s, Off=0.2s
Segment 3: On=0.2s, Off=0.2s
Segment 4: On=1.0s, Off=4.0s
Total Ring Length=60s
A ToneScript is a mini-script that specifies the frequency, level and cadence
parameters of a call progress tone. It can contain up to 127 characters. The syntax
follows:
FreqScript;Z1[;Z2]. The section Zi is similar to the Si section in a CadScript
except that each on/off segment is followed by a frequency components
parameter: Zi = Di(oni,1/offi,1/fi,1[,oni,2/offi,2/fi,2 [,oni,3/offi,3/fi,3 [,oni,4/offi,4/
fi,4 [,oni,5/offi,5/fi,5 [,oni,6/offi,6/fi,6]]]]])
Cisco SPA and Wireless IP Administration Phone Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa922 - ip phone with switchWip310 - iphone wireless voip phonePap2Spa525g - small business pro ip phone voipSpa941 - small business proSpa942-rc - small business pro ... Show all

Table of Contents