SPA and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Holding Tone
Conference Tone
Secure Call Indication Tone
Page Tone
Alert Tone
System Beep
Distinctive Ring Patterns
Parameter
Cadence 1
Cadence 2
Description
Informs the local caller that the far end has placed the
call on hold.
Defaults to 600@-19*(. 1 /. 1 /1,. 1 /. 1 /1,. 1 /9.5/1).
Played to all parties when a three-way conference call
is in progress.
Defaults to 350@-19;20(. 1 /. 1 /1,. 1 /9.7/1).
Played when a call has been successfully switched to
secure mode. It should be played only for a short while
(less than 30 seconds) and at a reduced level (less than
-19 dBm) so it does not interfere with the conversation.
Defaults to 397@-19,507@-19;15(0/2/0,.2/. 1 /1,. 1 /2. 1 /2).
Specifies the tone transmitted when the paging feature
is enabled.
Defaults to 600@-16;.3(.05/0.05/1).
Played when an alert occurs.
Defaults to 600@-19;.2(.05/0.05/1).
Audible notification tone played when a system error
occurs.
Defaults to 600@-16;. 1 (.05/0.05/1).
NOTE
WIP310 and SPA525G only.
Description
Cadence script for distinctive ring 1.
Defaults to 60(2/4).
Cadence script for distinctive ring 2.
Defaults to 60(.3/.2, 1/.2,.3/4.
B
219