Line Key - Cisco SPA942 - - IP Phone Administration Manual

SPA and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA and Wireless IP Phone Administration Guide

Line Key

When used in the configuration profile, parameters in this section must be
n
appended with , where
these parameters, see the
page 33.
Does not apply to the WIP310.
Parameter
Extension
Short Name
Share Call Appearance
Extended Function
n
represents line 1, 2, 3, 4, 5 or 6. For more information on
"Configuring Lines and Extensions" section on
Description
Extension number of the line key.
A short label shown on the LCD display for line key 1
through line key 6.
Yes indicates that Line Key 1/2/3/4/5/6 is a shared call
appearance. Otherwise this call appearance is not
shared (in other words it is private).
Defaults to no.
Use to assign Busy Lamp Field, Call Pickup, and Speed
Dial Functions to Idle Lines on the SPA9X2 or
SPA525G.
Syntax is:
fnc=type;sub=stationname@$PROXY;ext=ex
tension#@$PROXY
where:
•
fnc: function
•
blf: busy lamp field
•
cp: call pickup
•
sub: station name
•
ext: extension
B
239