2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
24
Enter the IP address of your phone.
Follow the on-screen directions.
Installing the Firmware (SPA525G)
Log in to the web interface.
Choose the Firmware Upgrade tab.
Click Firmware Upgrade Window.
Browse to select the firmware file from your PC. Click Submit. The firmware is
installed and your phone reboots.
Installing the Firmware (WIP310)
Turn off your WIP310 and connect it to your computer by using the USB cable.
Double-click the executable file for the firmware upgrade (for example, double-
click wip310-5-0-11.exe).
Follow the on-screen instructions.
When the upgrade is complete, disconnect the phone from your PC and power it
on.
NOTE: Your computer must be on the same
sub-network as the phone you are upgrading.
Cisco SPA and Wireless IP Phone Administration Guide
Getting Started
Upgrading Firmware