Ring Tone (Wip310); Auto Input Gain (Db) - Cisco SPA942 - - IP Phone Administration Manual

SPA and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA and Wireless IP Phone Administration Guide

Ring Tone (WIP310)

Parameter
Keypad Tone
Keypad Tone Volume

Auto Input Gain (dB)

Does not apply to the WIP310.
Parameter
Handset Input Gain
Headset Input Gain
Speakerphone Input Gain
Handset Additional Input Gain
Headset Additional Input Gain
Speakerphone Additional
Input Gain
Description
Select yes to enable the keypad tone to be played
when a key on the keypad is pressed. Select no to
silence the keypad.
Corresponds to the volume of the keypad tone.
Default is 5.
Description
The amount of amplification to apply to the audio input
signal for the handset.
Defaults to zero.
The amount of amplification to apply to the audio input
signal for the headset.
Defaults to zero.
The amount of amplification to apply to the audio input
signal for the speakerphone.
Defaults to zero.
Applies additional input gain to the handset.
Applies additional input gain to the headset.
Applies additional input gain to the speakerphone.
B
246