Cisco SPA942 - - IP Phone Administration Manual page 194

SPA and Wireless IP Phone Field Reference
Info Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Secondary DNS
NTP Enable (SPA525G only)
Primary NTP Server
(SPA525G only)
Secondary NTP Server
(SPA525G only)
TFTP Server (SPA525G only)
Bluetooth Enabled (SPA525G
only)
Bluetooth Firmware Version
(SPA525G only)
Bluetooth Connected
(SPA525G only)
Bluetooth MAC (SPA525G
only)
Connected Device ID
(SPA525G only)
Wireless Enabled (SPA525G
only)
Wireless Connected
(SPA525G only)
Wireless MAC (SPA525G
only)
SSID (SPA525G only)
Standard Channel (SPA525G
only)
Security Mode (SPA525G
only)
Description
Displays the secondary DNS server assigned to the
SPA9000.
Shows if Network Time Protocol is enabled.
IP Address of the primary NTP server.
IP Address of the secondary NTP server.
Address of the TFTP server for provisioning.
Shows if Bluetooth is enabled.
Displays the Bluetooth firmware version.
Shows if a Bluetooth device is connected to the phone.
Shows the hardware address of the Bluetooth device.
Shows the name of the connected Bluetooth device.
Shows if Wireless-G is enabled on the phone.
Shows if the phone is connected to the wireless
network.
Shows the hardware address of the Wireless-G
controller.
Shows the SSID, or name of the wireless router to
which the phone is connected.
Shows the wireless channel being used in the wireless
connection.
Shows if wireless security is configured on the phone
(yes or no).
B
192