Ethernet Port; Rs232, Rs422/485 Serial Port; Usb Port - Honeywell HJK7000 Installation And User Manual

About this Document and the UltraKey Plus

Ethernet Port

RS232, RS422/485 Serial Port

USB Port

20
Note Ethernet is used to connect to the controller web browser, MAXPRO-Net or
VideoBloX NetCPU.
• 10/100M Ethernet PoE (power over Ethernet) input. If PoE is the power input, it is
not recommended to connect this network with an outside building.
• TCP/IP protocol on the controller.
• For VideoBloX, the controller address range can be between 1 and 32. For
MAXPRO-Net, the address range can be between 1 and 99.
Note These ports are used to connect to MAXPRO-Net RS232 or RS422 and to
VideoBloX NetCPU, Standard CPU and Lite CPU RS422.
An isolated surge protection is suggested when using RS485/RS422 and when cabling
between buildings.
Note For MAXPRO-Net installations, COM1 (RS422) and COM2 (RS485) are
configured using the controller LCD menu and cannot be used at the same
time.
Note The USB port is not used with VideoBloX or MAXPRO-Net.
The USB port is used for connecting to a QWERTY USB keyboard. The following USB
keyboards are recommended:
• Logitech Y-UB83(Logitech Classic New Touch Keyboard 200USB)
• Logitech Y-BP62a
• Dell L110