5.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5BLX, CONTINUED
8. Click on the red dot on the right of the dialog box to enable the port.
If the port is unavailable you will get an "Invalid
port number" error message. This is because the
port is being used by another device, usually the
mouse or a modem. Click on the properties Icon
and select a different port.
9. If the port is available, the red dot changes to green and the Transmit Hex file Icon
Rev. 1.01
Figure 6: Enabling the CommPort
becomes visible.
Figure 8. Transmit Hex File
16
Red Dot
Figure 7: Invalid Port Error
900.0799
20-Jun-06