Using the UltraKey Plus Controller
Logging Onto the Controller
Document 800-02573 Rev B
11/2009
You may need to learn how to use the UltraKey Plus both before and after you begin
configuring. Key availability is dependent on the mode selected. In this section:
•
Logging Onto the
Controller, page
•
Using the UltraKey Plus to Navigate the LCD
•
VideoBloX Key
Functions, page
•
MAXPRO Key
Functions, page
1.
Connect the keyboard with a power adapter (12V (±10%) DC/1 A included) or a
network cable with POE. The system will enter VB mode or MAXPRO mode.
2.
Press Alt + Clr + Home keys on the controller.
The login screen displays.
3.
Enter the PIN password 3434.
The Settings screen displays.
Note
If an invalid password is entered, a warning message displays. Repeat the
steps to log on.
21
Menus, page
24
26
1
22
21