Document 800-02573 Rev B
11/2009
Port Settings
To configure port settings, press Port Settings.
•
Serial Port Settngs (COM 1)
Press COM1 to set type(RS422 or RS485), Baudrate,
Databit, Parity and Stopbit.
•
Serial Port Settings (COM 2)
Press COM2 to set type(RS232 or RS485), Baudrate,
Databit, Parity and Stopbit.
•
Ethernet Settings
Press Ethernet and then IP Address, Subnet Mask,
Default Gateway and Sys.Cntl.IP Address to modify.
KeyClick
To change the sound volume of
key pressing, press KeyClick.
LCD B/L
To adjust LCD backlight, keep pressing the button until a proper level is displayed.
Calibration Touchscreen
Touch the five red dots on the screen to calibration the touchscreen.
UltraKey Plus Controller Installation and User Guide
57