Table of Contents
Advertisement
Step 3: Configure Address
Step 4: Configure the Controller for VideoBloX Mode
(Optional) Configuring UltraKey Plus Using the Web Browser
Logging onto the Web Browser
Document 800-02573 Rev B
11/2009
To configure the keyboard address:
Quit
1.
Press
to exit from the Port Settings menu.
Keyboard Address
2.
Press
controller. You can also use the numeric keypad to enter a number between 1 and 32.
However, if you enter a number greater than 32, this operation is invalid.
3.
Press Enter to save the address and exit the configuration menu.
To configure the controller for VideoBloX mode:
1.
Press Users Menu to display the configuration screen.
2.
Refer to
User Menus
on page
3.
Press Home and then Quit to exit when the configuration is finished.
1.
If not already done, navigate to, or copy and paste, the applicable IP address into
your web browser:
•
LAN connections: for example, the default IP is http://192.168.1.9.
•
Crossover cable connections - static address: http://192.168.1.9.
2.
In the User Name field enter Administrator (case sensitive).
3.
In the Password field enter 1234 (default).
4.
Click Login.
UltraKey Plus Controller Installation and User Guide
to select an address between 1 and 32 to assign to the
62
to configure the device.
37
Hide quick links:
Advertisement
Table of Contents
