Upgrading The Ultrakey Plus Firmware; Rebooting Ultrakey Plus; Figure 4-5 Software Upgrade Warning Message - Honeywell HJK7000 Installation And User Manual

System Administration and Troubleshooting

Upgrading the UltraKey Plus Firmware

Rebooting UltraKey Plus

68
1. Log onto the web browser.
2. From the top menu, click the Upgrade tab.
The warning message Please make sure the network connection is
connected during system upgrading displays. See
3. Click OK.
The Software Upgrade menu opens.
4. Select a Folder from the drop-down list: Application, FPGA, Kernel, BL or FS.
5. In the Select File field, click Browse. Navigate to the file and click OK.
6. Click Send to start the upgrade process.
The Upgrade Status window opens. Messages display to indicate when the old files
are being erased and the new files are being copied.
When the process is complete, the message Upgrade success displays and the
7.
system reboots.
Figure 4-5 Software Upgrade Warning Message
1. Log onto the web browser.
2. From the top menu, click the System Reboot tab.
The Reboot System window opens.
3. Click Reboot to continue or click another tab or Logout to exit without rebooting.
Figure 4-5.