Step 2: Configure Maxpro Network Settings; Figure 3-10 System Configuration Tab - Honeywell HJK7000 Installation And User Manual

Step 2: Configure MAXPRO Network Settings

Document 800-02573 Rev B
11/2009
Figure 3-10 System Configuration Tab
To configure MAXPRO network settings:
1. From the side menu, click MAXPRO Configuration. See
2. Under Keyboard ID Setting, enter a number between 1 and 99 to set the
controller ID.
3. Under MAXPRO Device Network Setting, enter the IP address and Port Number of
the MAXPRO-Net Video Matrix system.
4. Click Apply to save the configuration, Cancel to exit without saving, or Default to
restore all factory default values.
UltraKey Plus Controller Installation and User Guide
Figure 3-11.
51