Rotating The Cisco Logo - Cisco 1130AG - Aironet - Wireless Access Point Hardware Installation Manual

Rotating the Cisco Logo

Rotating the Cisco Logo
The Cisco logo on the top of the unit can be rotated to correctly position the logo for any mounting
arrangement making it always easy to read.
To rotate the Cisco logo, follow these steps:
Place the end of an opened paper clip into each of the holes on the logo assembly (see
Step 1
Figure 2-16
1
Using the paper clips, rotate the logo until you reach the desired orientation. Detents are provided to help
Step 2
you align the logo for 90 degree rotations.
Remove the paper clips.
Step 3
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-24
Cisco Logo Holes
Status LED
1
2
2 Logo assembly holes
Chapter 2 Installing the Access Point
Figure 2-16).
OL-8369-05