Rotating The Cisco Logo; Checking The Access Point Leds - Cisco 521 Manual

Rotating the Cisco Logo

The Cisco logo on top of the unit can be rotated to correctly position the logo
for any mounting arrangement. For example, when the unit is mounted on a
vertical surface. The logo should always be easy to read.
To rotate the logo, follow these steps:
Step 1 Place the end of an opened paper clip into each of the holes on the
logo assembly.
Step 2
Using the paper clips, rotate the logo until you reach the desired
orientation. Detents are provided to help you align the logo for 90
degree rotations.
Step 3 Remove the paper clips.

Checking the Access Point LEDs

If your AP521 is not working properly, check the Status LED on the top panel
or the Ethernet and Radio LEDs in the cable bay area. You can use the LED
colors to assess the unit status.
Quick Start Guide: Cisco 521 Wireless Express Access Point
29