Table of Contents
Advertisement
SW_VLAN Messages
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message SW_VLAN-3-VTP_PROTOCOL_ERROR: VTP protocol code internal error
[chars].
Explanation
processing a configuration request, a packet, or a timer expiration. [chars] is the internal error.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message SW_VLAN-4-BAD_PM_VLAN_COOKIE_RETURNED: VLAN manager unexpectedly
received a bad PM VLAN cookie from the Port Manager, VLAN indicated [dec].
Explanation
from the port manager, which translated to a bad VLAN number. [dec] is the VLAN ID.
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting Cisco, see the
Traceback Reports" section on page
Error Message SW_VLAN-4-BAD_STARTUP_VLAN_CONFIG_FILE: Failed to configure VLAN from
startup-config. Fallback to use VLAN configuration file from non-volatile memory.
Explanation
the startup-configuration file. It will use the binary VLAN configuration file in NVRAM memory.
Recommended Action
Error Message SW_VLAN-4-BAD_VLAN_CONFIGURATION_FILE: VLAN configuration file
contained incorrect verification word [hex].
Explanation
not begin with the correct value. The VLAN configuration file is invalid, and it has been rejected.
[hex] is the incorrect verification value.
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting Cisco, see the
Traceback Reports" section on page
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
2-72
This message means that the VTP code encountered an unexpected error while
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the VLAN manager received an upcall and a VLAN cookie
Find out more about the error by using the show tech-support privileged EXEC
1-4.
This message means that the VLAN software did not use the VLAN configuration from
No action is required.
This message means that the VLAN configuration file read by the VLAN manager did
Find out more about the error by using the show tech-support privileged EXEC
1-4.
Chapter 2
Messages and Recovery Procedures
1-4.
1-4.
"Error
"Error Message
"Error Message
OL-9641-01
Advertisement
Table of Contents
