Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message EC-5-L3DONTBNDL1: [chars] suspended: PAgP not enabled on the remote
port.
Explanation
is not enabled for PAgP. In this mode, the port is placed in a suspended state. [chars] is the Layer 3
interface.
Recommended Action
configuration command.
Error Message EC-5-L3DONTBNDL2: [chars] suspended: LACP currently not enabled on the
remote port.
Note
Explanation
the partner port. In this mode, the port is put in a suspended state. [chars] is the interface name.
Recommended Action
Error Message EC-5-NOLACP: Invalid EC mode, LACP not enabled.
Explanation
included in the software image.
Recommended Action
Error Message EC-5-NOPAGP: Invalid EC mode, PAgP not enabled.
Explanation
EtherChannel mode cannot be set to desirable or auto.
Recommended Action
channel-group channel-group-number mode on interface configuration command.
Error Message EC-5-PORTDOWN: Shutting down [chars] as its port-channel is
admin-down.
Explanation
administrative state of its aggregate port. If the administrative state of the aggregate port is down,
the administrative state of the port is also forced to be down. [chars] is the physical interface.
Recommended Action
to activate the aggregation port.
OL-9641-01
This message means that PAgP is enabled on the Layer 3 interface, but the partner port
Enable PAgP on the remote side by using the channel-group interface
This message applies only to the Cisco ME 3400 switch.
This message means that LACP is enabled on a Layer 3 interface but is not enabled on
Enable LACP on the remote side.
This message means that the EtherChannel mode cannot be set because LACP is not
Install a software image that includes LACP, and set the EC mode to on.
This message means that PAgP is not included in the Cisco IOS image and that the
Obtain an image with PAgP included, or set the mode to on by using the
This message means that the administrative state of the port is controlled by the
Enter the no shutdown interface configuration command on the aggregate port
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
EC Messages
2-19
Advertisement
Table of Contents
