Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message PLATFORM_VLAN-3-MVID_ERROR: Mapped Vlan ID value [dec] associated with
vlan-id [dec] is invalid.
Error Message PLATFORM_VLAN-3-UNLOCK_FAIL: Failed to unlock vlan-id [dec],
associated mapped vlan id value [dec].
PM Messages
This section contains the port manager messages. The port manager is a state machine that controls all
the logical and physical interfaces. All features, such as VLANs, UDLD, and so forth, work with the port
manager to provide switch functions.
Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]
bytes.
OL-9641-01
This message means that an active VLAN is not correctly associated with a
Explanation
mapped-vlan-id (MVID). The first [dec] is the VLAN ID, and the second [dec] is the MVID.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Explanation
This message means that the switch failed to unlock a VLAN ID. The most likely cause
is that the VLAN is already unlocked. The first [dec] is the VLAN ID, and the second [dec] is the
MVID.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that the available memory for the switch processor is low. This can
Explanation
occur when too many Layer 2 VLANs are configured. [dec] is the available memory.
Remove features from the system to reduce memory usage.
Recommended Action
1-4.
1-4.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
PM Messages
"Error
"Error
2-41
Advertisement
Table of Contents
