Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual page 38

EC Messages
Error Message EC-5-COMPATIBLE: [chars] is compatible with port-channel members.
Explanation
from those of the port channel or ports within the port channel. The system has detected that the
attributes of the port now match the port-channel attributes. [chars] is the affected port.
Recommended Action
Error Message EC-5-DONTBNDL: [chars] suspended: incompatible partner port with
[chars].
Explanation
bundle. A port can only join the bundle when its global configuration and the configuration of the
partner port are the same as other ports in the bundle. The first [chars] is the local interface that is
being suspended, and the second [chars] is the local interface that is already bundled.
Recommended Action
bundle.
Error Message EC-5-ERRPROT: Channel protocol mismatch for interface [chars] in group
[dec]: the interface can not be added to the channel group.
Explanation
specified mode. [chars] is the interface, and [dec] is the channel group.
Recommended Action
Error Message EC-5-ERRPROT2: Command rejected: the interface [chars] is already part
of a channel with a different type of protocol enabled.
Explanation
because it is already part of a channel with a different type of protocol enabled. [chars] is the
interface.
Recommended Action
Error Message EC-5-ERRPROT3: Command rejected: the interface [chars] is already part
of a channel.
Explanation
because it is already part of a channel group. [chars] is the interface.
Recommended Action
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
2-18
This message means that a port was not operational because its attributes were different
No action is required.
The configuration of the partner port differs from the configuration of other ports in the
Verify that the configuration of the partner ports is the same for all ports in the
This message means that the interface cannot be added to the channel group with the
Change the channel group or the mode for the interface.
This message means that the interface cannot be selected for the specified protocol
Remove the interface from the channel group.
This message means that the interface cannot be unselected for the specified protocol
Remove the interface from the channel group.
Chapter 2 Messages and Recovery Procedures
OL-9641-01