Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual page 58

PLATFORM_SPAN Messages
PLATFORM_SPAN Messages
This section contains the Switched Port Analyzer (SPAN) messages.
Error Message PLATFORM_SPAN-3-PACKET_DROP: Decreases egress SPAN rate.
PLATFORM_UCAST Messages
This section contains platform unicast routing messages.
Note
Error Message PLATFORM_UCAST-3-ADJ: [chars].
Error Message PLATFORM_UCAST-3-ARP: [chars].
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
2-38
This message means that egress SPAN rates are falling because SPAN is enabled with
Explanation
multicast routing or fallback bridging.
Find out more about the error by using the show tech-support privileged EXEC
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting Cisco, see the
Traceback Reports" section on page
These messages apply only to the Cisco ME 3400 switch.
This message means that the adjacency module for unicast routing encountered an error.
Explanation
[chars] describes the error.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Explanation This message means that the ARP module for unicast routing encountered an error.
[chars] describes the error.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2
1-4.
1-4.
1-4.
Messages and Recovery Procedures
"Error Message
"Error
"Error
OL-9641-01