Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message HLFM-3-MOD_SD: Failed to modify Station Descriptor with index [dec],
vlan [dec], di [dec], error [dec], mad [dec], ref-count [dec].
IDBMAN Messages
This section contains the interface description block manager (IDBMAN) messages.
These messages apply only to the Cisco ME 3400 switch.
Note
Error Message IDBMAN-3-AGGPORTMISMATCH: [chars]: [chars]([dec] / [dec]) does not
match internal slot/port state [chars]([dec] / [dec]).
Error Message IDBMAN-3-DELETEDAGGPORT: [chars]([dec] / [dec]) Group [dec] has been
deleted, but is being reused.
OL-9641-01
This message means that the forwarding manager attempted to modify a station
Explanation
descriptor that is no longer in use or is invalid. The first [dec] is the station index, the second [dec]
is the VLAN ID, the third [dec] is the destination index, the fourth [dec] is the error code, the fifth
[dec] is the MAC address descriptor, and the sixth [dec] is the ref-count for this MAC address
descriptor.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that there is an internal error that caused the software to use an
Explanation
invalid aggregate port. The first [chars] is the name of the function where the error occurred. The
second and third [chars] are the port-channel names, and the ([dec] / [dec]) are the slot and port
numbers (slot/port).
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that there is an internal error that caused a deleted interface to be
Explanation
reused for a new aggregate port. [chars] is the port-channel name, and the ([dec] / [dec]) are the slot
and port numbers (slot/port). The last [dec] is the channel-group number.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
1-4.
1-4.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
IDBMAN Messages
"Error
"Error
2-27
Advertisement
Table of Contents
