Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual page 24

ACLMGR Messages
Error Message ACLMGR-3-AUGMENTFAIL: Augmenting of access-map [chars] on [chars]
label [dec] failed.
Explanation
internally required elements with the configured access maps. The first [chars] is the access-map
name, the second [chars] is the direction in which the map was applied (input or output), and [dec]
is the label number.
Recommended Action
Error Message ACLMGR-3-IECPORTLABELERROR: ACL labels are out-of-sync on interface
[chars], label [dec] is not available on asic [dec].
Explanation
name. The first [dec] is the label associated with the ACL, and the second [dec] is the ASIC number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message ACLMGR-3-INSERTFAIL: Insert of access-map [chars] #[dec] into [chars]
label [dec] failed.
Explanation
sections of an access map. The first [chars] is the map name, and the second [chars] is the direction
in which the map was applied. The first [dec] is the entry number, and the second [dec] is the label
number.
Recommended Action
any ACLs that have been defined but are not now used. Use simpler ACLs with fewer access control
entries (ACEs). Use fewer VLANs, and remove any unneeded VLANs from the VLAN database.
Error Message ACLMGR-3-INTTABLE: Not in truth table: VLMAP [dec] RACL [dec] Mcb [dec]
Feat [dec].
Explanation
merge the configured input features. [dec] are internal action codes.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
2-4
This message means that the system ran out of CPU DRAM when attempting to merge
Reduce other system activity to ease memory demands.
This message means that an internal software error has occurred. [chars] is the interface
Copy the message exactly as it appears on the console or in the system log.
This message means that the system ran out of CPU memory when trying to merge
Reduce other system activity to ease memory demands. For example, remove
This message means that an unrecoverable software error occurred while trying to
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-4.
1-4.
"Error
OL-9641-01