Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message ACLMGR-3-MAXRECURSION: Too many ([dec]) levels of recursion while
merging ACLs (code [dec]).
Explanation
ACL merge code to support. The most likely cause is too many separate access lists in a single
VLAN map or policy map. The first [dec] is the number of levels of recursion. The second [dec] is
an internal code number of the merge stage that encountered the problem.
Recommended Action
one VLAN or policy map to fewer than the number of levels reported by this log message.
Error Message ACLMGR-3-MERGEFAIL: [chars] ACL merge error [dec] ([chars]) on [chars]
label [dec].
Explanation
configured features into a form suitable for loading into the hardware. Packets potentially affected
by this feature will be sent to the CPU for processing instead. The most likely cause is specifying
an ACL that is too large or too complex for the system. The first [chars] is the ACL-type error (ip
or mac), the first [dec] is the error code, the second [chars] is the message string for the preceding
error code, the second [dec] is the label number, and the third [chars] is either input or output.
Recommended Action
Error Message ACLMGR-3-NOLABEL: Cannot allocate [chars] label for interface [chars].
Explanation
features on this interface. This means that the hardware cannot be programmed to implement the
features, and packets for this interface will be filtered in software. There is a limit of 256 labels per
direction. The first [chars] is the direction (input or output); the second [chars] is the interface name.
Recommended Action
possible.
Error Message ACLMGR-3-OUTTTABLE: Not in truth table: RACL [dec] VLMAP [dec].
Explanation
merge the configured output features. [dec] are internal action codes.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
OL-9641-01
This message means that the configuration is too complicated for the platform-specific
Reduce the number of IP or MAC access lists (considered separately) in any
This message means that the ACL manager was unable to complete the merge of the
Specify a smaller and less complicated configuration.
This message means that the ACL manager was unable to allocate a label for the
Use a simpler configuration. Use the same ACLs on multiple interfaces, if
This message means that an unrecoverable software error occurred while trying to
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
ACLMGR Messages
1-4.
2-5
Advertisement
Table of Contents
