Honda Miimo HRM1000 Owner's Manual page 70

Satellite assisted homing (HRM1500 Live, HRM2500 Live only)
Home screen
[3.Satellite assisted homing]
This function remembers the position of the station
and the position of the lawnmower based on the
GNSS position information, and starts moving toward
the docking station from the work end position.
NOTE:
- This function may not work in complex gardens
with many narrow passages and obstacles, or
when GNSS accuracy is low (behind buildings,
trees, etc.). In such a case, we recommend using a
shortcut wire.
Test return home
Home screen
[0.Test return home]
You can test if the lawnmower will correctly return to
the docking station.
Test returning through the different passages.
NOTE:
- Perform this test when the lawnmower is not
connected to the docking station.
Menu screen
[2.Garden setup]
J
Menu screen
[2.Garden setup]
J
Setting the lawnmower operation
[3.Homing setup]
J
Select [ON] or [OFF], and press the H
1
button.
Satellite assisted homing
O N
[3.Homing setup]
J
Test return home
Home
Clos e cov er to s tart
Close the control panel cover.
1
The lawnmower returns to the docking
station.
When the lawnmower is docked at the
2
docking station, press the manual STOP
button.
The control panel cover pops up.
The message "Test finished" appears on the
display.
J
O FF
J
67