Homing Setup - Honda Miimo HRM1000 Owner's Manual

Homing setup

Passage width
Home screen
[1.Passage width]
Garden setup
1.Mowing setup
2.Garden layout
3.Homing setup
You can set the minimum and maximum gap
between the lawnmower and boundary wire or
Shortcut wire when the lawnmower returns to the
docking station along the wire.
By setting this gap, you can prevent wheel tracks
from forming because the lawnmower returns home
on different routes.
Increase the gap as much as possible. The higher
the setting value, the less likely it is that wheel tracks
will form.
You can input a value from 0 to 12 for the setup level.
Boundary wire passage width sample table
Boundary wire
Setup level Passage width
0
1
2
3
4
5
6
7
8
9
10
11
12
Menu screen
[2.Garden setup]
J
10 cm
25 cm
30 cm
35 cm
40 cm
50 cm
60 cm
70 cm
80 cm
90 cm
100 cm
110 cm
130 cm
Setting the lawnmower operation
[3.Homing setup]
J
Shortcut wire
Setup level Passage width
1
2
3
4
5
6
7
8
9
10
11
12
- The field strength varies depending on the
length of the wire. The field becomes weaker
with a longer wire, and stronger with a shorter
wire.
- When the value is high (by avoiding moving
along the same path), you can reduce wheel
tracks in the grass.
- The numerical values of this table are for
reference to return the lawnmower to the
docking station along a straight line.
- The numerical values may differ depending on
the actual conditions.
TIPS Use as big passage width as possible so
to reach the area quickly.
It is recommended to use the shortcut
wire to pass through narrow passages
(HRM1500, HRM1500 Live, HRM2500,
HRM2500 Live).
J
25 cm
30 cm
35 cm
40 cm
50 cm
60 cm
70 cm
80 cm
90 cm
100 cm
110 cm
130 cm
65