Honda Miimo HRM1000 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Lawn Mower
  5. Miimo HRM1000
  6. Owner's manual
Honda Miimo HRM1000 Owner's Manual

Honda Miimo HRM1000 Owner's Manual

Robotic lawnmower
Hide thumbs Also See for Miimo HRM1000:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
Owner's Manual
Original Instructions
Robotic
Lawnmower
HRM1000/
1500/1500 Live/
Service & Support
2500/2500 Live
https://www.hondappsv.com/HME/
Please refer to "5.Mii-monitor Preparation" how to install the Mii-monitor
with mobile network (HRM1500 Live, HRM2500 Live) and Bluetooth
connectivity.
®

Advertisement

Table of Contents
loading

Related Manuals for Honda Miimo HRM1000

Summary of Contents for Honda Miimo HRM1000

  • Page 1 Owner’s Manual Original Instructions Robotic Lawnmower HRM1000/ 1500/1500 Live/ Service & Support 2500/2500 Live https://www.hondappsv.com/HME/ Please refer to "5.Mii-monitor Preparation" how to install the Mii-monitor with mobile network (HRM1500 Live, HRM2500 Live) and Bluetooth connectivity. ®...
  • Page 4 Congratulations on your selection of a Honda Robotic Lawnmower. We are confident that you will enjoy the benefit of your Honda Robotic Lawnmower as we take great pride in creating the finest quality lawn care products. We want to help you get the best results from your new robotic lawnmower and to operate it safely. This manual contains all the information on how to do that;...

  • Page 5: Table Of Contents

    CONTENTS Setting Safety Instructions Preparation Menu Settings - Component identification - Setting the work timer (M page 11) (M page 46) - Control panel and Home - Setting the lawnmower operation screen (M page 13) (M page 52) - Installation (M page 16) - Checking the system - Setting up the lawnmower (M page 68)
  • Page 6 1 OVERVIEW ........................4 How the Honda Robotic Lawnmower works ..4 2 SAFETY INSTRUCTIONS ..................6 Precautions ..........6 Observe the following points for your safety ... 8 Label locations ..........10 3 PREPARATION ....................... 11 Component identification ......11 Control panel and Home screen.

  • Page 7: Overview

    How the Honda Robotic Lawnmower works OVERVIEW How the Honda Robotic Lawnmower works The mowing area is determined by the boundary wire that emits a signal; when the lawnmower detects the boundary it turns and it cuts the grass randomly. When battery starts running out, it goes back to the docking station.
  • Page 8 How the Honda Robotic Lawnmower works Laying boundary wire The boundary wire location determines the parameters of the mowing area, this area may consist of multiple sections in which the lawnmower can operate. For mowing start point setup and detailed information please see “4 MENU SETTINGS” (M page 44).

  • Page 9: Safety Instructions

    Precautions SAFETY INSTRUCTIONS Precautions Carefully observe the following precautions. N WARNING • Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with this owner’s manual to use the lawnmower. Local regulations may restrict the age of the operator.
  • Page 10 Precautions • If lightning is imminent, remove the lawnmower from the docking station, unplug from the electrical outlet, and disconnect the boundary wire from the docking station. • Parts of this product may become warm in direct sunlight. Make sure you do not touch these parts if they become extremely hot or you may burn yourself.

  • Page 11: Observe The Following Points For Your Safety

    Observe the following points for your safety Observe the following points for your safety N WARNING • Do not puncture, crush, short circuit the battery. • Under normal conditions of use, the electrode materials and the electrolyte they contain are hermetically sealed, provided that the integrity of the battery is preserved and the solder remains intact.
  • Page 12 • Use this AC adapter by children shall be under the full supervision of parents. • When extending the cord on the output side of the AC adapter, use an extension cord specified by Honda. • Make sure that the contents of “SAFETY INSTRUCTIONS” are absolutely clear to persons who may come in contact with the robotic lawnmower.

  • Page 13: Label Locations

    You are also asked to carefully read the safety regulations in the applicable chapter of this handbook. The Honda Robotic Lawnmower is designed to give safe and dependable service if operated according to instructions.

  • Page 14: Preparation

    Component identification PREPARATION Component identification Body* Top view Bottom view Upper charging socket Lower charging socket Height adjustment dial Front (caster) wheels (Ï2) Blade disc Control panel Blades (Ï3) Carrying area Manual STOP button When you press the manual Rear (drive) wheels (Ï2) STOP button, the control panel cover pops up. *The figure shows an example of a model with a display. The HRM1000 has no display. Docking station HRM1000, HRM1500, HRM1500 Live HRM2500, HRM2500 Live...
  • Page 15 Component identification Supplied items AC adapter Extension cord Screws Connectors for the boundary wire and Install the AC adapter off If the power cord of the Fix with this screw on the the shortcut wire the ground. After making AC adapter is not long ground when laying the all other connections, enough, you can extend docking station.

  • Page 16: Control Panel And Home Screen

    Control panel and Home screen Control panel and Home screen Control panel (HRM1500, HRM1500 Live, HRM2500, HRM2500 Live) (Up/down) buttons Display Press to navigate to the previous/ The home screen and menus next item in the display. can be seen here while the G (Back) button lawnmower is turned on. Press to return to the previous menu in the display.
  • Page 17 Control panel and Home screen Control panel (HRM1000) Operations other than the following button operations are performed using Mii-monitor.(M page 79) (Mode/Activate) button Indicator Press to confirm command. The mode and error Press and hold to switch status are indicated by between the Auto mode and LED colors and blinking Manual Mode*.
  • Page 18 Control panel and Home screen Home screen operation • Displaying the menu screen Select [Menu] on the home screen with the button on the control panel and press the H button. Sat 25/NOV Menu top screen is displayed. 12:02 Menu For details on the menu screen, see “4 MENU SETTINGS” 1 .Wor k ti m e r (M page 44).

  • Page 19: Installation

    Installation Installation We recommend that an authorised Honda dealer performs the installation of your Robotic Lawnmower. Checking conditions for installation Check with the dealer that performed the installation if the docking station and boundary wire are installed according to the conditions below. Also periodically confirm that these conditions are still met.
  • Page 20 Installation Image Condition Near the corner Corner • The boundary wire must be laid according to the figure on the left. • There must be no obstacles within 1m of the docking station. • There must not be foreign objects within the More than More than 0-20 cm...
  • Page 21 Installation Image Condition Pattern 2 / Pattern 3 With shortcut wire (HRM1500, HRM1500 Live) Pattern 2: Clockwise installation more than more than Keep the boundary wire at least 1 m away from 1 m apart 1 m apart the right side face, left side face, and back face of the docking station.
  • Page 22 Installation Conditions for installing the docking station (HRM2500, HRM2500 Live) Image Condition • The docking station must be installed on a flat 5° (8.7%) surface with an inclination of no more than 5° 5° (8.7%) (8.7%). • The docking station must not be curved. 5° (8.7%) • The screws must be firmly tightened. 5°...
  • Page 23 Installation Image Condition Example of correct installation NOTE: The lines in the illustration are distinguished as follows. Up to one shortcut wire can be installed. Boundary wire Shortcut wire Pattern 1 Pattern 1: Perpendicular installation Connect the docking station perpendicular to Without shortcut wire the wire. within 30 cm 0 cm or more Lay the shortcut wire along the side of the With shortcut wire...
  • Page 24 Installation Image Condition Pattern 2: Clockwise installation Pattern 2 / Pattern 3 Connect the docking station parallel to the Without shortcut wire boundary wire (in the clockwise direction). 5 cm or less Pattern 3: Anti-clockwise installation Connect the docking station parallel to the boundary wire (in the Anti-clockwise direction). 5 cm or less 30 cm or more 30 cm or more...
  • Page 25 Installation Image Condition Pattern 4: Alcove installation Pattern 4 Connect the docking station in an alcove. Without shortcut wire 30 cm or more 20 cm or more With shortcut wire Lay the boundary wire around 30 cm or more apart from the docking station sides. Lay the boundary wire and the shortcut wire with an interval of 30 cm or more.
  • Page 26 Installation Image Condition Example of narrow passage installation Narrow passage installation Select Pattern 2 or Pattern 3 for the following example. • A narrow passage is one in which the distance between wires is 3 m or less. • Do not make the distance between wires 1 m or less. NOTE: 1 m – 3 m - For narrow passage installations, do not select docking direction Pattern 1.
  • Page 27 Installation Conditions for laying the boundary wire Image Condition Height of objects which the lawnmower might run on top of Lay boundary wire around objects which the lawnmower might run on top of (e.g. rocks, tree roots, etc.); these objects must be removed from the work area. Maximum Crossed The boundary wire entry and exit points for a...
  • Page 28 Installation Image Condition With shortcut wire (HRM1500/HRM1500 Live/ The shortcut wire can be laid on slopes of less HRM2500/HRM2500 Live) than 10°(17%). If the shortcut wire is laid on a slope of less than 10°(17%), lay it obliquely to the slope. Less than 10°...
  • Page 29 Installation Image Condition You can install multiple adjacent work areas if How to install multiple lawnmowers in adjacent zones you want to use multiple lawnmowers Signal type A Signal type B by changing the type of signal that travels through each wire. Set the adjacent areas’ signal types to be different in that case.
  • Page 30 Installation Installing boundary wire and connecting to the docking station Image Operation Set the boundary wire by using the “LAWN Boundary wire DIAGRAM” (M page 124). • Leave enough wire to ensure that small adjustments can be made, double backing outside of the loop is acceptable. • Do not fix the wire until finish the layout. •...
  • Page 31 Installation Image Operation HRM1000, HRM1500, HRM1500 Live Connector (S1) (HRM1500, HRM1500 Live only) The boundary wire must not be crossed when connecting to the docking station. Attach each wire to the station's connector Connector (AL) according to the instructions on the label attached to the station.

  • Page 32: Setting Up The Lawnmower

    Setting up the lawnmower Setting up the lawnmower *If your lawnmower model type is HRM1000, use Mii-monitor on smartphone/tablet. Refer to “5 Mii-monitor Preparation” (M page 79). When turning the lawnmower on initially, the initial settings will appear. Through the initial settings, you can configure the display language, internal date and time, and create your PIN (Personal Identification Number).
  • Page 33 Setting up the lawnmower Initial settings You can execute the setup wizard not only on the control panel of the lawnmower, but also in Mii-monitor. If you have not yet installed Mii-monitor, refer to “5 Mii-monitor Preparation” (M page 79). When turning the lawnmower on initially, the initial settings will appear to set the display language, internal date and time, and create your PIN (Personal Identification Number).

  • Page 34: Usage

    Setting up the lawnmower Configuring the settings through the setup wizard This section explains the setup wizard procedure using the control panel on the lawnmower. The setup wizard will guide you to configure the settings for your mowing operation as follows: Configuring and testing the Menu name Usage settings [1.Garden layout] For configuring the settings related to - Signal type the layout of the boundary wire.
  • Page 35 Setting up the lawnmower Setting the garden layout Through this setting, you can configure the information of your garden layout for operating the lawnmower. Setup wizard [1.Garden layout] is selected. Press the H button to configure the garden layout. Garden layout screen is displayed. 1.G arden lay ou t 2.Start points 3.T es t s tart points 4.Work timer Select the signal type and number of the shortcut Garden layout...
  • Page 36 Setting up the lawnmower When you are finished inputting a value, press the H button. [NEXT] will be selected. Press the H button again. The configuration of garden layout is completed. The setup wizard top screen is displayed and [2.Garden layout] is checked.
  • Page 37 Setting up the lawnmower Setting the start points Through this setting, you can set the starting point to operate the lawnmower. If you set the start points and combine them with the settings of work timer, you can effectively mow your garden. Select [2.Start points] and press the button Setup wizard to configure the start points.
  • Page 38 Setting up the lawnmower Testing the start points Through this testing, you can check the start points which you added in [2.Start points]. NOTE: - Perform each test when the lawnmower is connected to the docking station. Select [3.Test start points] and press the Setup wizard button to check the start points. 1. Garden lay ou t 2.
  • Page 39 Setting up the lawnmower Select [Yes] or [No] to the question of the test result Test start points and press H button. If you select [Yes], the Mowing start points screen is Do y ou want to modif y t he displayed to configure the start point settings. s tart point? If you select [No], go to step 3-7. NOTE: Ye s - For details on the start point settings, see step 2-3...
  • Page 40 Setting up the lawnmower Setting the work timer With this setting, you can configure the work day and work time at which the lawnmower operates in the Auto mode. Setup wizard Select [4.Work timer] and press the H button to configure the work day and work time. 1. Garden lay ou t 2. Start points 3. Tes t s tart points 4.
  • Page 41 Setting up the lawnmower Confirm the days which are automatically selected Work timer referring to the boundary wire length and garden size. Select [NEXT] and press the H button to Minimum day s required proceed to the timer setting screen. MO N NOTE: - You can select other days to operate the NEXT lawnmower. If you select [1.Auto fill up timer] in step 4-2, confirm the days which are automatically configured referring to the boundary wire length and garden size. If you do not change the setting, select [OK] and press the H button. Go to step 4-11. If you want to change the work time, select the day and press the H button to change the work time of the lawnmower. If you do not want to change the work time, select [OK] and press the H button. Go to step 4-7.
  • Page 42 Setting up the lawnmower Select [OK] and press the H button. Confirm the achieved and recommended hours per Work timer week. Select [NEXT] or [No] and press the H button. If you select [NEXT], go to step 4-12. Achiev ed If you select [No], go to step 4-5. 10hrs /week Rec ommended NOTE: 10hrs /week - If the set time is shorter than the NEXT [Recommended] time, the Achieved value will blink.
  • Page 43 Setting up the lawnmower Confirm each month’s ratio, select [NEXT]. Seasonal t imer J AN 0 0 % J UL 1 0 0 % NOTE: F EB 0 0 0 % AUG 1 0 0 % MAR 0 4 0 % SEP 0 8 0 % - You can modify the values for operating the APR 0 6 0 % OCT 0 4 0 % lawnmower.
  • Page 44 Setting up the lawnmower Configuring the settings through the advanced setup The advanced setup will guide you to configure the settings for your mowing operation as follows: Menu name Settings [1. Mowing settings] - Mowing pattern NOTE: - Wire overlap - Edge cutting - Making the detailed setting can reduce uncut - Spiral cutting leaves and cut efficiently.
  • Page 45 Setting up the lawnmower Mowing settings Select [ON] or [OFF] and press the H button. If you select [ON], go to step 1-6. Edge cutting If you select [OFF], go to step 1-8. O FF N EXT Select [CW], [ACW], or [Mixed] for the edge cutting Mowing settings direction. Edge cutting Select [NEXT] and press the H button. Direction Mixed N EXT Select the day of the week on which you want the Mowing s etti ngs lawnmower to run with the edge cutting function,...
  • Page 46 Setting up the lawnmower [Timer]: Enter a start time and end time in 24-hour format using the number buttons. Press the H button. Select install menu Press the G button. If you select [Finish] and press the H button, you will be returned to the home screen. 1.Setup wiz ard 2.Advanc ed s etup 3.Res tart init ial set up F i nis h...

  • Page 47: Menu Settings

    Menu overview MENU SETTINGS The control panel menus are used to set how the lawnmower operates. The menu settings can also be accessed in Mii-monitor. You can use Mii-monitor to save the settings. You can also restore saved settings. Menu overview NOTE: - We recommend having your dealer change these settings during installation.
  • Page 48 Menu overview Full menu diagram Menu Work timer Work timer : This indicates that the item can be set 1 From/To (Input value) MON/TUE/WED/THU/FRI/SAT/SUN through the Setup wizard. 2 From/To (Input value) Start points MON/TUE/WED/THU/FRI/SAT/SUN Point 1/2/3/4/5 JAN/FEB/MAR/APR/MAY/JUN/JUL/AUG/SEP/OCT/NOV/DEC (Input value) Seasonal timer Manual setup Deactivate...

  • Page 49: Setting The Work Timer

    Setting the work timer Setting the work timer You can set the work day and work time for the lawnmower to operate. You can also specify a specific area point to start from for each work time. Work timer You can select the day and time on which you want the lawnmower to operate.

  • Page 50: Start Points

    Setting the work timer The percentage which is Confirm the period of work time for configured in the seasonal each day of week. timer is the ratio in which the NOTE: lawnmower works in a month. - Black part in the bar is the time For details on the seasonal in which the lawnmower will timer, see “Seasonal timer”...
  • Page 51 Setting the work timer Menu screen Home screen [1.Work timer] [2.Start points] Select the day and press the H button. Configure this setting to make the lawnmower start mowing from specific start points on specific days of Add a check to the box by pressing the week.

  • Page 52: Seasonal Timer

    Setting the work timer Seasonal timer The growth speed of lawn depends on the season. With this function, you can configure the ratio of the mowing time for each season. Manual setup Menu screen Home screen [1.Work timer] [3.Seasonal timer] [1.Manual setup] Seasonal timer 1.M an ual se tu p...
  • Page 53 Setting the work timer Deactivate Menu screen Home screen [1.Work timer] [3.Seasonal timer] [2.Deactivate] Seasonal timer 1.M an ual se tu p 2.Dea cti va te Select [OK] and press the H button to return to the previous screen. You can deactivate the timer for each season for operating the lawnmower.

  • Page 54: Quiet Timer

    Setting the work timer Quiet timer You can set the blade speed, wheel speed and timer for operating the lawnmower quietly. Menu screen Home screen [1.Work timer] [4.Quiet timer] (“ON” is checked) Select [Blade speed] and press the H button. Configure this setting to operate the lawnmower with If you want the lawnmower to mow on your low noise during the period which you configure.

  • Page 55: Setting The Lawnmower Operation

    Setting the lawnmower operation Setting the lawnmower operation Mowing setup You can set up the Mowing settings as follows: NOTE: - Shortcut wire is not available on the HRM1000. Setting the angle to turn from the boundary wire or the shortcut wire Setting the distance to the start point When leaving the boundary wire, set the angle to turn Until the lawnmower reaches a set starting point...
  • Page 56 Setting the lawnmower operation Distance from the boundary wire when the lawnmower goes toward the mowing start points: The lawnmower moves between the boundary wire and the shortcut wires, and the specified value at random as it goes toward the start point. When setting the proper passage width When the passage width is set too high Narrow passage...
  • Page 57 Setting the lawnmower operation Passage width: From wire to middle of the lawnmower Middle of the lawnmower Passage width The boundary wire or the shortcut wire NOTE: - The field strength varies depending on the length of the boundary wire and the shortcut wire. The field becomes weaker with a longer wire, and stronger with a shorter wire.
  • Page 58 Setting the lawnmower operation Start points Menu screen Home screen [2.Garden setup] [1.Mowing setup] [1.Start points] [1.Point 1] to [3.Point 3] (HRM1000, HRM1500, HRM1500 Live) or [5.Point 5] (HRM2500, HRM2500 Live) Menu 12:02 Sat 25/NOV 12:02 Sat 25/NOV Garden setup Mowing setup 1.Work timer 1.
  • Page 59 Setting the lawnmower operation Mowing pattern Menu screen Home screen [2.Garden setup] [1.Mowing setup] [2.Mowing pattern] [1.Auto mode] [1.Point 1] to [5.Point 5] You can select from 3 mowing patterns below: [Directional] With the [Directional] setting, when the lawnmower detects the boundary wire, it turns at a narrow angle.
  • Page 60 Setting the lawnmower operation Advanced setting • Wire overlap Menu screen Home screen [2.Garden setup] [1.Mowing setup] [3.Advanced setting] [1.Wire overlap] Wire overlap: From boundary wire to front of the lawnmower. When the lawnmower detects the boundary wire, it can slightly cross the boundary to mow the outer edges of the mowing area.
  • Page 61 Setting the lawnmower operation • Edge cutting Menu screen Home screen [2.Garden setup] [1. Mowing setup] [3.Advanced setting] [2.Edge cutting] With this function, you can mow the unmown area along the boundary wire. If the edge cutting setting is enabled, the lawnmower goes around your garden along the boundary wire to mow the edge before starting the usual...
  • Page 62 Setting the lawnmower operation Select [ON] and press the H button. [Timer] is set. Go to step 4. Edge cutting O FF T i m er Select [ON] and press the H button. After setting, immediately start edge cutting. Go to step 5. Edge cutting O FF N ow...
  • Page 63 Setting the lawnmower operation • Spiral cutting Menu screen Home screen [2.Garden setup] [1.Mowing setup] [3.Advanced setting] [3.Spiral cutting] With this function, the lawnmower can be focused on mowing the area where the lawn is not completely mown, or the growth speed of the lawn is fast. The lawnmower detects the dense area and mow there spirally.
  • Page 64 Setting the lawnmower operation GNSS (HRM1500 Live, HRM2500 Live only) NOTE: - GNSS is an abbreviation for Global Navigation Satellite System. Position information can be obtained from satellites. Menu screen Home screen [2.Garden setup] [1.Mowing setup] [4.GNSS] [1.Free zone] With this function, you can set a location that you do not want the lawnmower to mow in. Free zone Select [1.Zone setting] and press H.
  • Page 65 Setting the lawnmower operation Enter the radius of the free zone to be set from 3 to 20m. Select [OK] and press the H button. [Please wait for 10 seconds.] is displayed. Zone setting R a di u s ( 3– 20 m) NE X T [Finish] is displayed, press the H button.

  • Page 66: Garden Layout

    Setting the lawnmower operation Garden layout *If your lawnmower model type is HRM1000, use Mii-monitor on smartphone/ tablet. Refer to “5 Mii-monitor Preparation” (M page 79). Docking direction Menu screen Home screen [2.Garden setup] [2.Garden layout] [1.Docking direction] Garden setup 1.Mowing setup 2.Garden layout 3.Homing setup...
  • Page 67 Setting the lawnmower operation Wire length/Garden size Menu screen Home screen [2.Garden setup] [2.Garden layout] [2.Wire length...] Enter the values of the boundary wire length and garden size. You can configure the information of your garden layout to operate the lawnmower. Garden layout NOTE: Boundary wire length...

  • Page 68: Homing Setup

    Setting the lawnmower operation Homing setup Passage width Menu screen Home screen [2.Garden setup] [3.Homing setup] [1.Passage width] Garden setup 1.Mowing setup 2.Garden layout 3.Homing setup Shortcut wire Setup level Passage width You can set the minimum and maximum gap between the lawnmower and boundary wire or 25 cm Shortcut wire when the lawnmower returns to the...
  • Page 69 Setting the lawnmower operation Select [1.Boundary wire] or [2.Shortcut wire] and press the H button. NOTE: - [2.Shortcut wire] is not displayed if the shortcut wire is not installed. Passage width 1.Boundary wire 2.Shortcut wire If [1.Boundary wire] is selected, choose clockwise or anti-clockwise and enter the Min and Max values.
  • Page 70 Setting the lawnmower operation Satellite assisted homing (HRM1500 Live, HRM2500 Live only) Menu screen Home screen [2.Garden setup] [3.Homing setup] [3.Satellite assisted homing] Select [ON] or [OFF], and press the H button. This function remembers the position of the station Satellite assisted homing and the position of the lawnmower based on the GNSS position information, and starts moving toward...

  • Page 71: Checking The System

    Checking the system Checking the system Check signal You can check if the boundary wire signal is correctly reaching the lawnmower and confirm how strong the signal is. Menu screen Home screen [3.Diagnostics] [1.Check signal] Menu 1.Work timer 2.Garden setup 3.Diagnostics 4.History 5.System settings...

  • Page 72: Test Start Points

    Checking the system Test start points You can check whether the lawnmower can correctly return to the docking station, and whether it can reach each start points according to settings. Test start points Menu screen Home screen [3.Diagnostics] [2.Test start points] [1.Point1] to [3.Point 3] (HRM1000, HRM1500, HRM1500 Live) or [5.Point 5] (HRM2500, HRM2500 Live) Select a point from 1 to 3 or 5 which you...
  • Page 73 Checking the system Home Menu screen Home screen [3.Diagnostics] [2.Test start points] [0.Home] Close the control panel cover. The lawnmower returns to the docking You can test if the lawnmower will correctly return to station. the docking station. When the lawnmower is docked at the NOTE: docking station, press the manual STOP button.

  • Page 74: Viewing History (M

    Viewing history Viewing history Operation history You can check the cumulative time that the lawnmower has operated and recharged. Menu screen Home screen [4.History] [1.Operating history] [1.Operating time] Menu 1.Work timer 2.Garden setup 3.Diagnostics 4.History 5.System settings 6.Setup wizard Select [1.Operating time] and press the H button.

  • Page 75: Work History

    Viewing history Work history Menu screen Home screen [4.History] [1.Operating history] [2.Work history] Check the history by pressing the down buttons to scroll the menu. You can view the lawnmower’s cutting history (when the lawnmower was mowing), return history (when Press the G button to return to the the lawnmower was returning to the docking station), previous screen.

  • Page 76: Fault History

    Viewing history Fault history You can view the lawnmower’s fault history (when a fault occurred). Menu screen Home screen [4.History] [2.Fault history] Select fault history entry by using the buttons. The history of errors that have occurred are logged. Press the H button. NOTE: Fault information is displayed.

  • Page 77: Setting The System (M

    Setting the system Setting the system Language You can set the menus of the display to your preferred language. Menu screen Home screen [5.System settings] [1.Language] Menu 1.Work timer 2.Garden setup 3.Diagnostics 4.History 5.System settings 6.Setup wizard Select your preferred language. Select the language shown in the display from among 12 languages.

  • Page 78: Date And Time

    Setting the system BG color Menu screen Home screen [5.System settings] [2.Display/Sound] [BG color] Select [White] or [Black] by pressing the buttons. You can set the background color of the control panel display. Press the H button to return to the previous screen.

  • Page 79: Security

    Setting the system Security Security settings are used to prevent the lawnmower from being operated by other people. Security settings require you to enter your PIN. If you forget your PIN, enter the PIN written in “DEALER CHECKSHEET” (M page 128) in this manual. If the lock is not released, please contact your dealer.
  • Page 80 Setting the system Accessory option Menu screen Home screen [5.System settings] [4.Security] [3.Accessory option] NOTE: - Before selecting [3.Accessory option], you will need to input your PIN. If you forget your PIN, contact your dealer. - Consult your dealer about accessory option. Select [ON] or [OFF] by pressing the buttons.

  • Page 81: Reset

    You can get the information of the lawnmower such as the model name, frame serial number, and software version. Menu screen Press and hold number button “0” Help Honda Power E quipment Miimo :HRM2500 Liv e This is the model name. : MCNF -100000 1 This is the frame serial number.

  • Page 82: Mii-Monitor Preparation

    • Settings identical to the lawnmower control panel • Various settings such as operation time • Voice operation through AI speaker (Alexa)* • Backup and reset your settings on the Honda server • Error notification to user* • Theft notification with location acquisition and geofencing (dealer setting)* •...

  • Page 83: Registering A User

    Confirm the content. If you accept, tap [Accept]. Input a password. Register a Serial Number (M page 10). QR code Manual input Tap [Registration] to send the inputted information to the Honda server. Failed Try again after a while. Also, check if you can connect to the network.

  • Page 84: Pairing A Device (Connecting Via Bluetooth ® )

    Pairing a device (connecting via Bluetooth ® Pairing a device (connecting via Bluetooth ® • It is not possible to connect more than one user id to the same lawnmower. If you want to connect more than one smartphone/tablet to your lawnmower, the same user id must be used on all devices. •...
  • Page 85 Pairing a device (connecting via Bluetooth®) After a while, the search results are displayed. Tap the serial number of the lawnmower you want to connect (M page 10). Android If the serial number of the lawnmower is not displayed, the Bluetooth of the lawnmower or ®...

  • Page 86: Menu Display After Connecting To A Device

    Menu display after connecting to a device Menu display after connecting to a device If your smartphone and the lawnmower are connected when you press STOP button, the following screen is displayed. Sat 25/NOV 12:02 Displayed when connected to a paired device. Home Menu Example: Bluetooth...

  • Page 87: Usage

    Checking the mowing area / Connecting to a power source USAGE Checking the mowing area Before operating the lawnmower, ensure the mowing area is free of animals and foreign objects. Turn off the lawnmower before removing any foreign objects. NOTE: - If there are any holes (such as rabbit holes, etc.) in the work area, fill them in so that the work area is level.
  • Page 88 Connecting to a power source Connect the power cord connector to the station’s internal connector. NOTE: - When disconnecting the connectors, make sure to lift the clip. Attach the connector cover to the station. (The power cord and boundary wire should go through the notch in the connector cover.) N CAUTION Do not secure the power cord with the pegs used to...

  • Page 89: Checking The Lawnmower

    Checking the lawnmower Checking the lawnmower Before operation, check to make sure that it is connected all the way into the docking station. The light above the charging plug changes as follows: Description Green The docking station signal setting is correct. Green The boundary wire is too long.

  • Page 90: Turning On / Off The Power

    Turning on / off the power Turning on / off the power Turning on the power After the battery is charged, press the A (On) button (HRM1500, HRM1500 Live, HRM2500, HRM2500 Live) or (Power On/Off) button(HRM1000) to turn on the lawnmower. The A / button is located on the control panel.
  • Page 91 Turning on / off the power Enter the PIN using the number buttons. 12:02 Sat 25/NO V PI N c ode NOTE: - To change the PIN, see “Create a PIN” (M page Input y our PIN 76). _ _ _ Remaining att empts :3 Press the H button.

  • Page 92: Operating The Lawnmower In The Auto Mode

    Operating the lawnmower in the Auto mode Operating the lawnmower in the Auto mode *If your lawnmower model type is HRM1000, use Mii-monitor on smartphone/tablet. Refer to “5 Mii-monitor Preparation” (M page 79). These instructions can be used to operate the lawnmower at the time scheduled for the Auto mode settings.

  • Page 93: Operating The Lawnmower In The Manual Mode

    Operating the lawnmower in the Manual mode Operating the lawnmower in the Manual mode *If your lawnmower model type is HRM1000, use Mii-monitor on smartphone/tablet. Refer to “5 Mii-monitor Preparation” (M page 79). Use the Manual mode when you want to ignore work timer settings. As an example, you can move the lawnmower by yourself if there are two or more separated mowing areas within the boundary wire, the mower cannot travel between the areas.
  • Page 94 Operating the lawnmower in the Manual mode Example of the Manual mode operation These instructions can be used to operate the lawnmower for the Manual mode settings. HRM1000 Press and hold the (Power On/Off) button on the control panel for 3 seconds HRM1500, HRM1500 Live, HRM2500, HRM2500 Live Press the B (Off) button on the control panel.
  • Page 95 Operating the lawnmower in the Manual mode Canceling the Manual mode operation You can cancel the operation which you selected on the Manual mode screen and the lawnmower returns to the docking station. NOTE: - If you select [Mow then resume auto timer], the lawnmower will stop at the time of the work timer configured in the Auto mode.

  • Page 96: Adjusting The Height Of The Blades

    Adjusting the height of the blades Adjusting the height of the blades The height of the blades determines how tall or short the grass will be cut. Test the lawnmower on a small area and adjust blade height according to your preference. N WARNING - Make sure to press the manual STOP button before performing the following procedure.

  • Page 97: Weekly Checks (M

    Adjusting the height of the blades / Weekly checks Close the height adjustment dial cover, and close the control panel cover. Repeat the steps above if you need to make additional adjustments. Weekly checks Check the lawnmower and docking station once a week to remove dirt and grass. Also check if the blades and blade disc have been damaged, and verify that there are no other problems.

  • Page 98: Carrying The Lawnmower

    Carrying the lawnmower Carrying the lawnmower When carrying the lawnmower, observe the following points. N WARNING - Do not carry the lawnmower with the blades pointed toward you. - Take care to avoid dropping the lawnmower when carrying it. HRM1000 - Make sure to press the manual STOP button and press and hold the (Power On/Off) button for 3 seconds to turn the power off before performing the following procedure.
  • Page 99 Carrying the lawnmower - You can use the remote control feature of Mii-monitor to move the lawnmower. When using remote control, follow the precautions below. - Operate in a brightly-lit area - Avoid operating on wet grass - Thoroughly watch your footing on inclines - Do not forcefully connect the lawnmower to the docking station using remote control.

  • Page 100: Troubleshooting

    Before contacting your dealer TROUBLESHOOTING Before contacting your dealer In the unlikely event that you are facing a problem and you need to contact your dealer, ensure that you have the following information available. • Owner’s Manual • Consider any recent work in your garden. •...

  • Page 101: Messages

    Messages Messages If any of the following messages appear in the display, use this troubleshooting guide to address the problem before contacting your dealer. If the problem persists, contact your dealer. Message Cause Solution *Lock out display The PIN code is incorrect. Please enter the correct PIN code.
  • Page 102 Messages Message Cause Solution Obstruction An obstruction is being detected, or Enter the PIN so that the message disappears. If the message does not disappear, contact your the sensor detects something. detection dealer. Outside loop The lawnmower exited the boundary Move the lawnmower into the work area.

  • Page 103: Resolving Problems

    Resolving problems Resolving problems Unless having the power on is necessary to check something, turn off the power when checking the condition of the lawnmower or the blade. Problem Solution The lawnmower cannot be Check the cord connections, confirm that the docking station’s LED indicator charged.
  • Page 104 Resolving problems Problem Solution Noticeable wheel tracks. Try to reduce the work timer. You can reduce the work timer automatically by using “Seasonal timer”. Try to increase “passage width”. The lawnmower stops frequently. Operation of this product with other wireless devices, remote controls, or electric fences is not guaranteed.

  • Page 105: Maintenance

    The required service intervals and the kind of maintenance to be performed are described in the following chart. Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will be able to perform a variety of checks and software updates that cannot be completed by the owner.

  • Page 106: Maintenance Procedures

    Maintenance procedures Maintenance procedures Dirt and grass may accumulate on the top and bottom of the lawnmower during and after mowing, and the blades may become worn, damaged, or unable to turn. Make sure to check the lawnmower according to the chart in “Periodic inspection and maintenance”...
  • Page 107 Maintenance procedures Preparing Perform the following procedures in an area not subject to rainfall. Correct Incorrect 90 degrees More than 90 • Put on a pair of work gloves. or less degrees • When checking the blades, turn the lawnmower on its side. •...
  • Page 108 Maintenance procedures Cleaning the docking station N WARNING - Unplug the AC adapter’s plug from the power outlet (House) before cleaning it. NOTE: - Do not wash the docking station with water. The docking station may be damaged. Clean dirt and grass off of the docking station using a plastic brush. Brush off dirt and grass from docking station, particularly around parts on which the lawnmower rests and around the charging plugs area: HRM1000, HRM1500, HRM1500 Live...
  • Page 109 Maintenance procedures Press the A (On) button on the control panel. Test a start point (M page 69). When the lawnmower is moving, press the manual STOP button and check that the lawnmower stops. Checking the docking station HRM1000, HRM1500, HRM1500 Live Check item(s) Action Damage to the docking...
  • Page 110 Maintenance procedures Locate both rear wheels of the lawnmower Rear wheel at the highest position of the docking station. Check if there is a gap between the docking station’s charging plug and the lawnmower’s charging socket. If there is not, adjust the docking station. Set the rear wheel to the highest position of the docking station.
  • Page 111 Maintenance procedures HRM2500, HRM2500 Live Check item(s) Action Damage to the docking Visually inspect the docking station. Docking station station If it is damaged, consult your dealer. Visually inspect the metal contacts on the charging plug for corrosion, which can be identified by a greenish discoloration on the Condition of the charging Charging plug...
  • Page 112 Maintenance procedures Check item(s) Action Check if there is a gap between the docking Gap between the docking station’s charging plug and the lawnmower’s station’s charging plug and Docking station charging socket. If there is none, adjust the the lawnmower’s charging docking station according to the installation socket conditions (M page 16), or consult your dealer.
  • Page 113 Maintenance procedures Checking the docking station screws Check item(s) Action Visually inspect the screws. Loosened screws of the Docking station If they are loose, tighten them with a flat-blade docking station screwdriver. HRM1000, HRM1500, HRM1500 Live Screw HRM2500, HRM2500 Live Correct Incorrect Screw Checking the boundary wire connectors and 4 pins connector* *4 pins connector is for HRM2500 and HRM2500 Live only.
  • Page 114 Maintenance procedures HRM2500, HRM2500 Live Boundary wire connectors 4 pins connector Checking the rear (drive) tire tread depth Check item(s) Action Measure the depth of the treads at the center of Tread depth of the rear the tire. Rear (drive) tire (drive) tire If they are 3 mm or less, contact a service dealer.
  • Page 115 Maintenance procedures Checking the charge socket Check item(s) Action Visually inspect the metal parts of the charge Charge socket clogged with socket. grass clippings. If the charge socket is clogged with grass, remove the grass clippings. Charge socket Visually inspect the metal contacts of the charge socket for wear, corrosion, or damage.
  • Page 116 Maintenance procedures Checking the blades and blade disc Check the condition of the blades and blade disc as follows. Lifetime of the blades In order to have good cutting performance, maintain the sharp cutting edge on the blades. Typically, the lifetime of the blades is 160 hours.
  • Page 117 Maintenance procedures Replacing the blades To replace the blades, perform the procedures below. N WARNING - Put on a pair of work gloves before performing the following procedures. - Do not touch the blade while it is spinning. You may be injured if you do so. NOTE: - This work requires technical skill and knowledge, as well as special tools.

  • Page 118: Storage

    Spray electrical contact cleaner on boundary wire terminals before encasing them in a waterproof box (e.g. electrical junction box) to ensure they do not corrode over the winter period. Honda recommends that all electrical components such as the AC adapter should be stored in a dry, frost free environment that is not exposed to the winter weather.

  • Page 119: Technical Information

    Specifications TECHNICAL INFORMATION Specifications Model HRM1000 HRM1500 HRM1500Live Description code MCJF MCKF MCLF Type Length 655 mm Width 535 mm Height 270 mm Weight 11.3 kg 11.3 kg 11.5 kg Electrical system Li-ion Battery 21.6 V / 1900 mAh Input AC 230 V AC 240 V AC 230 V AC 230 V AC 240 V AC 230 V AC 230 V AC 240 V AC 230 V AC adapter Output...
  • Page 120 Specifications Model HRM2500 HRM2500Live Description code MCMF MCNF Type Length 655 mm Width 535 mm Height 270 mm Weight 11.6 kg 11.8 kg Electrical system Li-ion Battery 21.6 V / 3800 mAh Input AC 230 V AC 240 V AC 230 V AC 230 V AC 240 V AC 230 V AC adapter Output 1.5 A / 40 V...

  • Page 121: Appendix

    Major Honda distributor addresses Major Honda Distributor Addresses Adresses des principaux concessionnaires Honda Appendix Adressen derwichtigsten Honda-Haupthändler Elenco dei maggiori distributori Honda in Europa Adressen van Honda-importeurs Major Honda Distributor Addresses Direcciones de los principales concesionarios Honda AUSTRIA DENMARK ITALY...

  • Page 122: Content Outline

    HRM1000 HRM1500 HRM1500 HRM2500 HRM2500 HRM4000 Manufacturer Honda France Manufacturing S.A.S. • Pôle 45 - Rue des Châtaigniers 45140 ORMES – France Authorized representative and able to compile the technical documentation • Honda Motor Europe Ltd Cain Road, Bracknell, Berkshire,...

  • Page 123: Content Outline

    HRM2500 EC, SC HRM4000 EC, SC 3. Manufacturer and able to compile the technical documentation Honda France Manufacturing S.A.S. • Pôle 45 - Rue des Châtaigniers 45140 ORMES - FRANCE 4. References to applied standards EN 60335-1:2012 / AC:2014 / A11:2014 / A13:2017 /...
  • Page 124 “EC Declaration of Conformity” CONTENT OUTLINE Français. (French) Italiano (Italian) Deutsch (German) Déclaration CE de Conformité Dichiarazione CE di Conformità EG-Konformitätserklärung 1. Le soussigné, *1, représentant du constructeur, déclare que la 1. Il sottoscritto, *1 in rappresentanza del costruttore, dichiara qui di 1.
  • Page 125 “EC Declaration of Conformity” CONTENT OUTLINE Magyar ( Hungarian ) Cestina (Czech) Latviešu (Latvian) EK-megfelelőségi nyilatkozata ES – Prohlášení o shodě EK atbilstības deklarācija 1. Alulírott *1, mint a gyártó képviselője nyilatkozom, hogy az általunk 1. Zástupce výrobce, *1 svým podpisem potvrzuje, že stroj popsaný níže 1.

  • Page 126: Lcd Menu Index

    LCD MENU INDEX Menu name Step Page Advanced setting Garden setup → Mowing setup P.57 Alarm System settings → Security P.76 Auto mode Garden setup → Mowing setup → Mowing pattern → Auto mode P.56 BG color System settings → Display/Sound P.75 Capacity for homing Garden setup →...

  • Page 127: Lawn Diagram

    LAWN DIAGRAM...

  • Page 131: Dealer Checksheet

    DEALER CHECKSHEET The following information is provided by your dealer after setup is complete. You can save your settings using Mii-monitor and restore them in case you made unwanted modifications. You can also restore your dealer’s recommended settings from Mii-monitor to your lawnmower. Basic setting information (M pages 30, 74, 76) PIN (Personal Identification Number): Language : English / Deutsch / Français / Italiano / Nederlands / Svenska / Norsk / Español / Polski / Dansk /...
  • Page 132 Other setting item information Please fill the following items if configuring them with the Menu settings. Garden layout setting information (M pages 55, 63, 65) Passage width: Home screen [2.Garden setup] [1.Mowing setup] [1.Start points] [1.Point 1] to [5.Point 5] Point 1: Point 2: Point 3:...

  • Page 133: Quick Guide

    QUICK GUIDE Fundamentals For the HRM1000, refer to the Mii-monitor Operation Guide. Turning on / off the power Sending back home Mii-monitor (M page 13, 87) (M page 13) Refer to the Mii-monitor Operation Guide. Stopping the lawnmower (M page 11) Adjusting the cutting height (M page 93) Decrease Increase...
  • Page 134 Technical tips Mowing mode You can select from 2 modes of operation (available in “Menu Settings”). Auto mode (M page 89) The lawnmower automatically mows according to inputted time and garden settings. Manual mode (M page 90) Start mowing anytime without timer settings. Cleaning the lawnmower (M page 104) NOTE: Clean dirt and grass off of the lawnmower using a brush...
  • Page 135 1000/1500/1500 Live/ 2500/2500 Live 32VP7700 xxxx.xxxx.xx 00X32-VP7-7000 © Honda Motor Co., Ltd. 2023 Printed in France...

This manual is also suitable for:

Miimo hrm1500 miimo hrm1500 liveMiimo hrm2500Miimo hrm2500 live

Table of Contents