Honda Miimo HRM1000 Owner's Manual page 64

GNSS (HRM1500 Live, HRM2500 Live only)
NOTE:
- GNSS is an abbreviation for Global Navigation Satellite System. Position information can be obtained
from satellites.
Home screen
[4.GNSS] [1.Free zone]
J
With this function, you can set a location that you do not want the lawnmower to mow in.
To activate the configuration, it will take effect once
the specified requirements are met.
- The lawnmower must be able to receive GPS
signals.
- The free zone must be set.
Narrow passages, complex yards with many
obstacles, and low GNSS sensitivity (behind
buildings and trees) can cause:
- The lawnmower intrudes into the free zone.
- The lawnmower performs evasive action (renewal,
turning) in front of the free zone.
Free zone can be set in one place. If you want to
make a new place, set the zone setting again.
Free zone settings can be easily configured with the
Mii-monitor application.
Menu screen
[2.Garden setup]
J
Setting the lawnmower operation
[1.Mowing setup]
J
Free zone
Select [1.Zone setting] and press H.
1
Free zone
1.Zone setting
2.Timer
Select [ON] and press the H button.
2
Zone setting
O N
Place the lawnmower in the center of
3
the free zone to be set, and press the H
button.
Zone setting
P l ac e M i i m o i n t he c en t er
o f Fr ee zo ne
D o n ot c l o s e c ov e r
J
O FF
N E X T
61