Honda Miimo HRM1000 Owner's Manual page 20

1 m
More than More than
1 m 1 m
Docking direction
Pattern 1*
Pattern 3
*Except HRM1000
Example of correct installation
The lines in the illustration are distinguished as follows.
Boundary wire
Shortcut wire
Pattern 1
With shortcut wire
(HRM1500, HRM1500 Live)
more than
1 m apart
more than
1 m apart
Do not provide
Boundary wire
here
Shortcut wire 1
Image
Near the corner
Corner
1 m
0-20 cm More than
1 m
Pattern 2
more than
1 m apart
1 m or
more in
a straight
line
Condition
• The boundary wire must be laid according to
the figure on the left.
• There must be no obstacles within 1m of the
docking station.
• There must not be foreign objects within the
work area near the docking station (in the
shaded area indicated in the image).
• The boundary wire under the docking station
must be laid toward the outside of the work
area.
Docking direction
There are three patterns* for installing the
docking station displayed on the setting screen
( M page 32).
*If you are using HRM1000, you can select
pattern 2 or pattern 3.
NOTE:
- Up to one shortcut wire can be installed.
- There must be no obstacles within 1m of the
docking station.
Pattern 1 : Perpendicular installation
Keep the boundary wire at least 1 m away from
the right side face, left side face, and back face
of the station.
Keep the shortcut wire straight at least 1 m from
the station.
NOTE:
Attach the shortcut wire to the right side from
the front view.
Installation
17