Honda Miimo HRM1000 Owner's Manual page 67

Setting the lawnmower operation
Wire length/Garden size
Home screen
[2.Wire length...]
You can configure the information of your garden
layout to operate the lawnmower.
NOTE:
- Before configuring the settings, confirm the
completion of installing the docking station and
laying boundary wire with your dealer.
- If the DEALER CHECKSHEET at the end of
Owner's Manual was already filled out by your
dealer, refer to it when configuring the settings.
Signal type/shortcut wire
Home screen
[3.Single type/short cut wire]
When changing the signal type, do so while the
lawnmower is not docked with the docking station.
64
Menu screen
[2.Garden setup]
J
Menu screen
[2.Garden setup]
J
[2.Garden layout]
J
Enter the values of the boundary wire
1
length and garden size.
Garden layout
Boundary wire length
_ _ 0m
Garden size
_ _ 00 m
Press the H button.
2
Press the G button to return to the
3
previous screen.
[2.Garden layout]
J
Enter the signal type and number of the
1
shortcut wire.
Garden layout
Signal type
A B
Shortcut wire quantity
0 1
Dock the lawnmower to the docking
2
station. [Finish] is displayed, select
[NEXT] and press H button.
J
( 5 0– 80 0m )
( 1 00 –3 00 0 m )
2
J
C D
NE X T