Honda Miimo HRM1000 Owner's Manual page 31

Installation
HRM1000, HRM1500, HRM1500 Live
Connector (S1)
(HRM1500,
HRM1500 Live only)
HRM2500, HRM2500 Live
Connector (S1)
Connector (AR)
28
Image
Connector (AL)
Connector (AR)
Connector (AL)
Tab
Operation
The boundary wire must not be crossed when
connecting to the docking station.
Attach each wire to the station's connector
according to the instructions on the label
attached to the station.
Boundary wire left side: AL
Boundary wire right side: AR
Shortcut wire 1: S1 *
(*HRM1500, HRM1500 Live, HRM2500,
HRM2500 Live only)
1. Remove the connector cover/station cover (M
page 84).
2. Pass the boundary wire and the shortcut
wire through the tabs as shown (HRM2500,
HRM2500 Live only).
3. Insert the connectors into the pins.
4. Install the station cover.
NOTE:
- To connect the AC adapter to the docking
station (M page 84).