Honeywell Pallet Accuglide ZoneFlex Accumulation Conveyor Maintenance Manual page 36

Preventive Maintenance
Solenoid Valve Style Oiler
The 24VDC or 110VAC solenoid operated oiler is designed to spray an oil mist
(10W, non-detergent) onto the drive chain in response to a timed external control
signal (typically from the PLC). This maintained external signal opens the 3-way, 2
position valve to pressurize the lubricant reservoir and spray nozzle.
Figure 3-6 Solenoid Operated Chain Oiler
Every 160 hours: check oil level in automatic oiler reservoir. Empty the drip cup.
Also, visually inspect chain for proper level of lubrication. Evidence of over-
lubrication would be excess oil on adjacent components, such as, driver pad, driver
pad track, and housing. Evidence of under-lubrication would be chain links that
appear dry, or chain link pins that are rusted, grooved, or galled and pin/bushing
joints that are discolored (brown, rust red, or black). Evidence of proper lubrication
Pallet Accuglide ZoneFlex Accumulation Conveyor
30
Maintenance Manual
| | 29334206
February 14, 2018