General Description
Control Voltage
Accumulation Zone
Activation
Elevation Range
Operating
Environment
Power
Requirements
Supports
Accessories and
Options
Finish
Pallet Accuglide ZoneFlex Accumulation Conveyor
16
•
110VAC or 24VDC for discharge solenoid valve and optional
solenoid operated oiler.
•
24VDC for ZoneFlex control valve.
Retro-reflective sensors (24V) with ZoneFlex control valve
modules.
18 inches to 48 inches top of roller.
+40° to +104° F (+4° to +40° C)
•
Clean, electric power of 230 or 460 volts, 3 Phase, 60 Hz is
required for motors.
•
Control power is 24VDC or 110VAC, single phase, 60 Hz.
•
24VDC power required for ZoneFlex zone control valves
(requires 110 - 230VAC input for standard power supply).
Heavy-duty 7 gage formed channel with gussets.
•
Advance Rollers
•
Air Supply Panel
•
Cable - Parallel T-Cable
•
Cable - Power Extension - optional
•
Cable - Photo-Eye Extension - optional
•
Cable - Photo-Eye Signal Splitter - optional
•
Cable - Power Isolator - optional
•
Chain, RC50 with Extended Pin
•
Drip Pan Assembly - optional
•
Driver Pad with/Wear Indicator
•
Fixed End Stop - Angle - optional
•
Fixed End Stop - Channel - optional
•
Photo-Eye Bracket / Reflector Mount - optional
•
Power Supply Panel
•
Support Legs
•
Wheel Side Guides - optional
Powder coated paint.
Maintenance Manual
|
| 29334206
February 14, 2018