Honeywell Pallet Accuglide ZoneFlex Accumulation Conveyor Maintenance Manual page 31

Sprockets
Check teeth for signs of wear or damage.
Check alignment/sprocket height.
Chain Lubricator
Check the level of lubricant in the oil reservoir (add SAE
10 weight non-detergent oil as required).
Check surrounding area for indications of excessive
lubrication.
Check that the chain's appearance is lightly lubricated
and the lubricant is being applied evenly to the bottom of
the chain.
Check the drip cup and empty if necessary.
Verify the oil reservoir air regulator is set at 12 psi.
Drive Pad
Check the width of the purple wear strip indicator.
Check condition of pad splices.
Check that the pad surface is not excessively dirty or oily.
Filter/Regulator
Clean or replace the filter element (5 micron) if dirty.
Urethane Driver Pad
Check the physical condition and proper operation.
Electrical Wiring/Voltages
Check the physical condition and proper operation.
Check the oil level.
Change the oil at recommended schedule. See the
Reducers section for details.
Pallet Accuglide ZoneFlex Accumulation Conveyor
February 14, 2018
Monthly Inspections
Semi-Annual Inspections
|
Date:
Date:
Maintenance Manual
| 29334206
Preventive Maintenance
Changes/
Checked
Repair
by:
made:
Changes/
Checked
Repair
by:
made:
25