Maintenance; Inspection Before Operation; Cleaning The Machine - Makita DCU602 Instruction Manual

Battery powered wheelbarrow
Hide thumbs Also See for DCU602:
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE

CAUTION:
Always be sure to park the machine
on flat ground and lock the brake lever before storage
or attempting to perform inspections or maintenance.
CAUTION:
Always be sure that the lock key
and battery cartridge are removed from the machine
before storage, inspections, or maintenance.
CAUTION:
Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Inspection before operation

Perform the following inspections before operating the machine.
Check that the bolts, nuts, and knobs are tightened firmly.
Fig.44
Check that the brake is working properly. If you feel
the brake is not working sufficiently, perform the clean-
ing of the brake. If no improvement can be found, ask
Makita Authorized Service Centers for repair.
Check that the dump unit is locked when the han-
dle of the dump unit is fully pulled down.
Fig.45
► 1. Handle
Check that the tires of front and rear wheels are
not damaged, and the air in the tires is sufficient.
Check that the front lamps, and rear lamp are
clean. Clean them if necessary.
Check that the scrapers are in the correct posi-
tion. If the scraper is facing upward, adjust the
orientation of the scraper by loosing the bolts.
When tightening the bolts, do not push the scraper
toward the front of the machine.
1
Fig.46
► 1. Scraper

Cleaning the machine

NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE:
Do not use the high pressure washer
for cleaning.
NOTICE:
When cleaning the machine, be sure
to close the cover of battery box. Otherwise, water
may enter into the battery box, and cause a malfunc-
tion of machine.
Remove mud, dirt, and the like from the machine. Clean
the machine with running water. After the cleaning, wipe
the machine with a dry cloth.
1
Storage
Lock the brake lever, and remove the battery cartridges
and lock key. Store the machine in a safe place out of
the reach of children.
24 ENGLISH

Advertisement

Table of Contents
loading

Table of Contents