Makita DCU602 Instruction Manual page 12

ASSEMBLY
CAUTION:
Always be sure that the machine
is switched off and the battery cartridges are
removed before carrying out any work on the
machine.
Before installing or removing the carrier or bucket, be
sure to lock the brake lever. To lock the brake lever, pull
and hold the brake lever, then pull the lock lever, and
then release the brake lever while pulling the lock lever.
2
Fig.3
► 1. Brake lever 2. Lock lever
Installing or removing the bucket
Installing the bucket
1. Take out the bucket, stays, and front pipe from the
box.
Fig.4
► 1. Bucket 2. Stay 3. Front pipe
1
1
2
3
12 ENGLISH
2. Insert the front pipe between the upper frame and
lower frame of the dump unit.
1
Fig.5
► 1. Front pipe
3. Place the stay on the dump unit, and then tempo-
rarily tighten the bolts with the front pipe together. Install
the other stay to the dump unit in the same way.
1
2
Fig.6
► 1. Stay 2. Bolt