Maintenance - Makita DCU603 Instruction Manual

You can dump the objects by lifting and tilting the carrier
or bucket.
1.
Stop the machine, and then lock the brake lever.
NOTICE:
It is recommended to chock the front
wheels to stabilize the machine.
2.
Rotate the lock lever of dump unit toward the front
of machine to unlock the dump unit.
Fig.60
► 1. Lock lever
3. Stand at the side of the machine, then hold the
handle of the machine with one hand, and then hold the
handle of the dump unit with the other hand.
Fig.61
CAUTION:
Hold the handles of the machine
and dump unit firmly, and work in a stable
posture.
4.
Tilt the carrier or bucket by lifting up the handle of
the dump unit.
5. Return the carrier or bucket, and then lock the
dump unit by pulling down the handle of the dump unit.
CAUTION:
After dumping loads, be sure to
lock the dump unit by returning the dump unit to
its original position.
To drain the liquid inside of the flat bucket, loosen and
remove the cap of the flat bucket. Tighten the cap after
the draining.
1
► 1. Cap
27 ENGLISH
Draining liquid
CAUTION:
Before draining the liquid, be sure
to lock the brake lever.
Fig.62
NOTE: When removing the cap, be careful as the
cap may be pushed out by the pressure of liquid. Be
careful not to get the liquid on your face or other parts
of your body.

MAINTENANCE

CAUTION:
Always be sure to park the
machine on flat ground and lock the brake lever
before storage or attempting to perform inspec-
tions or maintenance.
CAUTION:
Always be sure that the lock
key and battery cartridge are removed from
the machine before storage, inspections, or
maintenance.
CAUTION:
Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.
1