Maintenance - Makita DCU602Z Instruction Manual

Loading objects
CAUTION:
Before loading objects on the
machine, make sure that the machine is turned off
and the brake lever is locked.
CAUTION:
Before loading objects on the
machine, make sure that the dump unit is locked.
CAUTION:
Be sure to load objects within the
carrier or bucket. If objects are sticking out of the
carrier or bucket, they may fall or collapse if they
touch obstacles.
► Fig.39
CAUTION:
Be sure to load objects so that
they are below eye level. If the load is too high, it is
dangerous because the view is obscured. Also, there
is a risk of overturning and injury because the load is
likely to be unbalanced.
► Fig.40
CAUTION:
Do not load the objects beyond the
height of the bucket. Loading the objects beyond
the height of the bucket may cause the load to fall or
collapse.
When loading objects on the carrier, secure the objects
with ropes and tie them down to the rope hooks of the
carrier.
► Fig.41: 1. Rope hook
Dumping objects
CAUTION:
When lifting or returning the car-
rier or bucket, never insert or place any part of
your body between the dump unit and the carrier
or bucket, or under the dump unit. Doing so may
result in injury or burns.
CAUTION:
After dumping loads, be sure to
lock the dump unit by returning the dump unit to
its original position.
CAUTION:
Before lifting the carrier or bucket
manually, be sure to lock the brake lever.
Lift the carrier or bucket on flat
CAUTION:
and stable ground. Operation on unstable ground
may cause an accident or injury.
CAUTION:
Keep the load to a minimum. If
the load is large, do not try to lift the carrier or
bucket. Reduce the load, and then lift the carrier
or bucket.
If the load is fixed by ropes or
CAUTION:
other means, untie the load before lifting the
dump unit.
CAUTION:
Before lifting the carrier or bucket,
make sure that there are no people or obstacles
around the machine.
You can dump the objects by lifting and tilting the carrier
or bucket.
1. Stop the machine.
2. Tilt the bucket or carrier forward by pressing the
upper side of the tilt switch while holding the brake
lever.
► Fig.42: 1. Tilt switch
To manually dump the objects left in the bucket or
3.
carrier, follow the steps below.
• Lock the brake lever, and then stand at the side of
the machine.
• Rotate the lock lever of the dump unit toward the
front of the machine to unlock the dump unit.
• Hold the handle of the dump unit, and then tilt the
bucket or carrier forward to dump the objects.
• Return the bucket or carrier to the dump unit.
► Fig.43: 1. Lock lever 2. Dump unit
CAUTION:
Hold the handle of the dump unit
firmly, and work in a stable posture.
NOTICE:
It is recommended to chock the front
wheels to stabilize the machine.
4. Return the bucket or carrier to its original position
by pressing the lower side of the tilt switch while holding
the brake lever.
NOTICE:
Be sure to return the bucket or carrier
to its original position after dumping objects. If
the bucket or carrier is not returned completely and
locked, the traveling speed of machine is limited up
to 0.8 km/h.

MAINTENANCE

CAUTION:
Always be sure to park the
machine on flat ground and lock the brake lever
before storage or attempting to perform inspec-
tions or maintenance.
CAUTION:
Always be sure that the lock
key and battery cartridge are removed from
the machine before storage, inspections, or
maintenance.
CAUTION:
Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
26 ENGLISH