Table of Contents
Advertisement
Adjust the Battery Life alarm volume
Adjust the Battery Life alarm volume
The administrator controls the Battery Life alarm settings such as the alarm sound, tone, and vibration.
However, you can adjust the volume of the Battery Life alarm.
Procedure
Step 1
Access the Battery Life
Step 2
Tap the Overflow menu.
Step 3
Tap Settings.
Step 4
Swipe the Alarm volume slider.
Stop the Battery Life alarm
If the administrator enables battery monitoring with an audible alarm, an alarm sounds if your battery falls
below the set low battery threshold.
When the battery alarm sounds, you can temporarily snooze the alarm. However, the alarm continues until
the battery is above the set low battery threshold.
Note
Note
Procedure
Step 1
To snooze the battery alarm, swipe the alarm.
Step 2
To stop the battery alarm, either plug the phone into a charger or change the battery to one with more charge
than the low battery threshold.
Related Topics
Cisco Wireless Phone 840 and 860 User Guide
94
app
If you're in a call, the alarm activates in vibrate mode with a visual alert. When the call ends, if you didn't
snooze the alarm, the audible alert begins.
If you set your phone to Do Not Disturb mode and the low battery alarm triggers, it overrides Do Not Disturb
and sounds the alarm. After you snooze the alarm, the phone goes into normal mode and remains in normal
mode, in effect canceling Do Not Disturb.
Phone battery
charging, on page 44
Install the
battery, on page 39
Remove the
battery, on page 41
Battery Life app
Advertisement
Table of Contents
