Emergency And Panic Button; Activate The Panic Alarm - Cisco 840 User Manual

Emergency and panic button

Step 3
To see how much snooze time remains, swipe down on the notification bar again.
Step 4 To Stop snoozing, swipe down on the notification bar and tap the Emergency notification again.
Emergency and panic button
Based on your organization requirements, your administrator may configure the Emergency button and Panic
Button for use in case of emergency.
When you activate the Panic Button, the phone enters an alarm state. What happens in the alarm state depends
on how the administrator configures the Emergency button and Panic Button. A loud warning tone may
sound and your phone may automatically call an emergency number.
Note

Activate the panic alarm

Your administrator can configure the programmed red Emergency button on the top of your phone and the
Panic Button in the Emergency
• Long press
• Two short presses
• Either a long press or two short presses
Contact your administrator to understand how to activate the panic alarm with your phone.
Note
Your administrator configures the actions that happen when you activate the Panic Button. For example, the
Panic Button may automatically:
• Place an emergency call.
• Activate the speakerphone.
• Place an emergency call using the speakerphone.
Procedure
Do one of the following:
• If programmed, press the red Emergency button on the top right of the phone, as directed.
Cisco Wireless Phone 840 and 860 User Guide
84
If the phone calls an emergency number from the alarm state, any active call you may be on automatically
ends.
If you press the red Emergency button or Panic Button incorrectly, a pop-up tells you how to trigger a panic
alarm.
app to activate in several different ways:
Emergency app