Table of Contents
Advertisement
Barcode app
Before you begin
• Use the small tab to remove the plastic cover on the barcode scanner.
• Use the Buttons
Note
Procedure
Step 1
Access the Barcode
Step 2
Tap the Overflow menu.
Step 3
Tap Test scan.
Step 4
From the Barcode screen, tap the barcode scanner
Step 5
Point the barcode reader 1–18 inches (2.5–46 centimeters) from the barcode that you want to scan.
Step 6
Press and hold the programmed Scanner button with the light shining across the entire barcode symbol until
the light turns off and you hear a beep.
The Barcode type and the Scanned barcode data appear on the Barcode screen. The barcode search
button is enabled.
Step 7
Tap the barcode search
The search results appear in the default browser on your phone.
Scan a barcode
The barcode reader is on the top rear of the handset. It takes longer to scan large 2D barcodes. For example,
it may take the scanner several seconds to read a large 3000 character barcode.
The scanner lights for the Cisco Wireless Phone 840S are white and green.
The scanner lights for the Cisco Wireless Phone 860S are red.
Before you begin
• Before first use, use the small tab to remove the plastic cover on the barcode scanner.
• If not already done, use the Buttons
app to program a button as the Scanner.
By default, the top-left button of the Cisco Wireless Phone 860S is set to Scanner.
By default, the bottom-left button of the Cisco Wireless Phone 840S is set to
Scanner.
app.
button to find data about the scanned barcode.
button.
app to program a button as the Scanner.
Cisco Wireless Phone 840 and 860 User Guide
Scan a barcode
103
Advertisement
Table of Contents
